django-orchestra-test/orchestra/bin/celeryd

#!/bin/sh -e
# ============================================
#  celeryd - Starts the Celery worker daemon.
# ============================================
#
# :Usage: /etc/init.d/celeryd {start|stop|force-reload|restart|try-restart|status}
# :Configuration file: /etc/default/celeryd
#
# See http://docs.celeryproject.org/en/latest/tutorials/daemonizing.html#generic-init-scripts


### BEGIN INIT INFO
# Provides:          celeryd
# Required-Start:    $network $local_fs $remote_fs
# Required-Stop:     $network $local_fs $remote_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: celery task worker daemon
### END INIT INFO
#
#
# To implement separate init scripts, copy this script and give it a different
# name:
# I.e., if my new application, "little-worker" needs an init, I
# should just use:
#
#   cp /etc/init.d/celeryd /etc/init.d/little-worker
#
# You can then configure this by manipulating /etc/default/little-worker.
#
VERSION=10.0
echo "celery init v${VERSION}."
if [ $(id -u) -ne 0 ]; then
    echo "Error: This program can only be used by the root user."
    echo "       Unprivileged users must use the 'celery multi' utility, "
    echo "       or 'celery worker --detach'."
    exit 1
fi


# Can be a runlevel symlink (e.g. S02celeryd)
if [ -L "$0" ]; then
    SCRIPT_FILE=$(readlink "$0")
else
    SCRIPT_FILE="$0"
fi
SCRIPT_NAME="$(basename "$SCRIPT_FILE")"

DEFAULT_USER="celery"
DEFAULT_PID_FILE="/var/run/celery/%n.pid"
DEFAULT_LOG_FILE="/var/log/celery/%n%I.log"
DEFAULT_LOG_LEVEL="INFO"
DEFAULT_NODES="celery"
DEFAULT_CELERYD="-m celery worker --detach"

CELERY_DEFAULTS=${CELERY_DEFAULTS:-"/etc/default/${SCRIPT_NAME}"}

# Make sure executable configuration script is owned by root
_config_sanity() {
    local path="$1"
    local owner=$(ls -ld "$path" | awk '{print $3}')
    local iwgrp=$(ls -ld "$path" | cut -b 6)
    local iwoth=$(ls -ld "$path" | cut -b 9)

    if [ "$(id -u $owner)" != "0" ]; then
        echo "Error: Config script '$path' must be owned by root!"
        echo
        echo "Resolution:"
        echo "Review the file carefully and make sure it has not been "
        echo "modified with mailicious intent.  When sure the "
        echo "script is safe to execute with superuser privileges "
        echo "you can change ownership of the script:"
        echo "    $ sudo chown root '$path'"
        exit 1
    fi

    if [ "$iwoth" != "-" ]; then  # S_IWOTH
        echo "Error: Config script '$path' cannot be writable by others!"
        echo
        echo "Resolution:"
        echo "Review the file carefully and make sure it has not been "
        echo "modified with malicious intent.  When sure the "
        echo "script is safe to execute with superuser privileges "
        echo "you can change the scripts permissions:"
        echo "    $ sudo chmod 640 '$path'"
        exit 1
    fi
    if [ "$iwgrp" != "-" ]; then  # S_IWGRP
        echo "Error: Config script '$path' cannot be writable by group!"
        echo
        echo "Resolution:"
        echo "Review the file carefully and make sure it has not been "
        echo "modified with malicious intent.  When sure the "
        echo "script is safe to execute with superuser privileges "
        echo "you can change the scripts permissions:"
        echo "    $ sudo chmod 640 '$path'"
        exit 1
    fi
}

if [ -f "$CELERY_DEFAULTS" ]; then
    _config_sanity "$CELERY_DEFAULTS"
    echo "Using config script: $CELERY_DEFAULTS"
    . "$CELERY_DEFAULTS"
fi

# Sets --app argument for CELERY_BIN
CELERY_APP_ARG=""
if [ ! -z "$CELERY_APP" ]; then
    CELERY_APP_ARG="--app=$CELERY_APP"
fi

CELERYD_USER=${CELERYD_USER:-$DEFAULT_USER}

# Set CELERY_CREATE_DIRS to always create log/pid dirs.
CELERY_CREATE_DIRS=${CELERY_CREATE_DIRS:-0}
CELERY_CREATE_RUNDIR=$CELERY_CREATE_DIRS
CELERY_CREATE_LOGDIR=$CELERY_CREATE_DIRS
if [ -z "$CELERYD_PID_FILE" ]; then
    CELERYD_PID_FILE="$DEFAULT_PID_FILE"
    CELERY_CREATE_RUNDIR=1
fi
if [ -z "$CELERYD_LOG_FILE" ]; then
    CELERYD_LOG_FILE="$DEFAULT_LOG_FILE"
    CELERY_CREATE_LOGDIR=1
fi

CELERYD_LOG_LEVEL=${CELERYD_LOG_LEVEL:-${CELERYD_LOGLEVEL:-$DEFAULT_LOG_LEVEL}}
CELERY_BIN=${CELERY_BIN:-"celery"}
CELERYD_MULTI=${CELERYD_MULTI:-"$CELERY_BIN multi"}
CELERYD_NODES=${CELERYD_NODES:-$DEFAULT_NODES}

export CELERY_LOADER

if [ -n "$2" ]; then
    CELERYD_OPTS="$CELERYD_OPTS $2"
fi

CELERYD_LOG_DIR=`dirname $CELERYD_LOG_FILE`
CELERYD_PID_DIR=`dirname $CELERYD_PID_FILE`

# Extra start-stop-daemon options, like user/group.
if [ -n "$CELERYD_CHDIR" ]; then
    DAEMON_OPTS="$DAEMON_OPTS --workdir=$CELERYD_CHDIR"
fi


check_dev_null() {
    if [ ! -c /dev/null ]; then
        echo "/dev/null is not a character device!"
        exit 75  # EX_TEMPFAIL
    fi
}


maybe_die() {
    if [ $? -ne 0 ]; then
        echo "Exiting: $* (errno $?)"
        exit 77  # EX_NOPERM
    fi
}

create_default_dir() {
    if [ ! -d "$1" ]; then
        echo "- Creating default directory: '$1'"
        mkdir -p "$1"
        maybe_die "Couldn't create directory $1"
        echo "- Changing permissions of '$1' to 02755"
        chmod 02755 "$1"
        maybe_die "Couldn't change permissions for $1"
        if [ -n "$CELERYD_USER" ]; then
            echo "- Changing owner of '$1' to '$CELERYD_USER'"
            chown "$CELERYD_USER" "$1"
            maybe_die "Couldn't change owner of $1"
        fi
        if [ -n "$CELERYD_GROUP" ]; then
            echo "- Changing group of '$1' to '$CELERYD_GROUP'"
            chgrp "$CELERYD_GROUP" "$1"
            maybe_die "Couldn't change group of $1"
        fi
    fi
}


check_paths() {
    if [ $CELERY_CREATE_LOGDIR -eq 1 ]; then
        create_default_dir "$CELERYD_LOG_DIR"
    fi
    if [ $CELERY_CREATE_RUNDIR -eq 1 ]; then
        create_default_dir "$CELERYD_PID_DIR"
    fi
}

create_paths() {
    create_default_dir "$CELERYD_LOG_DIR"
    create_default_dir "$CELERYD_PID_DIR"
}

export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"


_get_pids() {
    found_pids=0
    my_exitcode=0

    for pid_file in "$CELERYD_PID_DIR"/*.pid; do
        local pid=`cat "$pid_file"`
        local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
        if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
            echo "bad pid file ($pid_file)"
            one_failed=true
            my_exitcode=1
        else
            found_pids=1
            echo "$pid"
        fi

    if [ $found_pids -eq 0 ]; then
        echo "${SCRIPT_NAME}: All nodes down"
        exit $my_exitcode
    fi
    done
}


_chuid () {
    su "$CELERYD_USER" -c "$CELERYD_MULTI $*"
}


start_workers () {
    if [ ! -z "$CELERYD_ULIMIT" ]; then
        ulimit $CELERYD_ULIMIT
    fi
    _chuid $* start $CELERYD_NODES $DAEMON_OPTS     \
                 --pidfile="$CELERYD_PID_FILE"      \
                 --logfile="$CELERYD_LOG_FILE"      \
                 --loglevel="$CELERYD_LOG_LEVEL"    \
                 $CELERY_APP_ARG                    \
                 $CELERYD_OPTS
}


dryrun () {
    (C_FAKEFORK=1 start_workers --verbose)
}


stop_workers () {
    _chuid stopwait $CELERYD_NODES --pidfile="$CELERYD_PID_FILE"
}


restart_workers () {
    _chuid restart $CELERYD_NODES $DAEMON_OPTS      \
                   --pidfile="$CELERYD_PID_FILE"    \
                   --logfile="$CELERYD_LOG_FILE"    \
                   --loglevel="$CELERYD_LOG_LEVEL"  \
                   $CELERY_APP_ARG                  \
                   $CELERYD_OPTS
}


kill_workers() {
    _chuid kill $CELERYD_NODES --pidfile="$CELERYD_PID_FILE"
}


restart_workers_graceful () {
    local worker_pids=
    worker_pids=`_get_pids`
    [ "$one_failed" ] && exit 1

    for worker_pid in $worker_pids; do
        local failed=
        kill -HUP $worker_pid 2> /dev/null || failed=true
        if [ "$failed" ]; then
            echo "${SCRIPT_NAME} worker (pid $worker_pid) could not be restarted"
            one_failed=true
        else
            echo "${SCRIPT_NAME} worker (pid $worker_pid) received SIGHUP"
        fi
    done

    [ "$one_failed" ] && exit 1 || exit 0
}


check_status () {
    my_exitcode=0
    found_pids=0

    local one_failed=
    for pid_file in "$CELERYD_PID_DIR"/*.pid; do
        if [ ! -r $pid_file ]; then
            echo "${SCRIPT_NAME} is stopped: no pids were found"
            one_failed=true
            break
        fi

        local node=`basename "$pid_file" .pid`
        local pid=`cat "$pid_file"`
        local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
        if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
            echo "bad pid file ($pid_file)"
            one_failed=true
        else
            local failed=
            kill -0 $pid 2> /dev/null || failed=true
            if [ "$failed" ]; then
                echo "${SCRIPT_NAME} (node $node) (pid $pid) is stopped, but pid file exists!"
                one_failed=true
            else
                echo "${SCRIPT_NAME} (node $node) (pid $pid) is running..."
            fi
        fi
    done

    [ "$one_failed" ] && exit 1 || exit 0
}


case "$1" in
    start)
        check_dev_null
        check_paths
        start_workers
    ;;

    stop)
        check_dev_null
        check_paths
        stop_workers
    ;;

    reload|force-reload)
        echo "Use restart"
    ;;

    status)
        check_status
    ;;

    restart)
        check_dev_null
        check_paths
        restart_workers
    ;;

    graceful)
        check_dev_null
        restart_workers_graceful
    ;;

    kill)
        check_dev_null
        kill_workers
    ;;

    dryrun)
        check_dev_null
        dryrun
    ;;

    try-restart)
        check_dev_null
        check_paths
        restart_workers
    ;;

    create-paths)
        check_dev_null
        create_paths
    ;;

    check-paths)
        check_dev_null
        check_paths
    ;;

    *)
        echo "Usage: /etc/init.d/${SCRIPT_NAME} {start|stop|restart|graceful|kill|dryrun|create-paths}"
        exit 64  # EX_USAGE
    ;;
esac

exit 0