<source>Always execute the configured bind flow to authenticate the user</source>
<target>항상 구성된 바인드 플로우를 실행하여 사용자를 인증</target>
</trans-unit>
<trans-unit id="scef3f4ad80abbd22">
<source>Configure how the outpost authenticates requests.</source>
<target>Outpost가 요청을 인증하는 방법을 구성합니다.</target>
</trans-unit>
<trans-unit id="sbcae51a6f06e53d4">
<source>Search mode</source>
<target>모드 검색</target>
</trans-unit>
<trans-unit id="s9065fcccd837a679">
<source>Cached querying</source>
<target>캐시된 쿼리</target>
</trans-unit>
<trans-unit id="s30d0d0e6c626a234">
<source>The outpost holds all users and groups in-memory and will refresh every 5 Minutes</source>
<target>Outpost는 모든 사용자와 그룹을 인메모리에 보관하며 5분마다 새로 고칩니다.</target>
</trans-unit>
<trans-unit id="sffc14b8200a9f938">
<source>Direct querying</source>
<target>직접 쿼리</target>
</trans-unit>
<trans-unit id="sdce4680288083fe3">
<source>Always returns the latest data, but slower than cached querying</source>
<target>항상 최신 데이터를 반환하지만 캐시된 쿼리보다는 느립니다.</target>
</trans-unit>
<trans-unit id="s8b87df5664de7eb8">
<source>Configure how the outpost queries the core authentik server's users.</source>
<target>Outpost가 코어 authentik 서버의 사용자를 조회하는 방식을 구성합니다.</target>
</trans-unit>
<trans-unit id="sfe388f0313f52da2">
<source>Protocol settings</source>
<target>프로토콜 설정</target>
</trans-unit>
<trans-unit id="s55d731be1ef66efe">
<source>Base DN</source>
<target>Base DN</target>
</trans-unit>
<trans-unit id="s0b15ff11a0049cfd">
<source>LDAP DN under which bind requests and search requests can be made.</source>
<target>바인드 요청 및 검색 요청을 수행할 LDAP DN입니다.</target>
</trans-unit>
<trans-unit id="sb157267c85fdff30">
<source>Certificate</source>
<target>인증서</target>
</trans-unit>
<trans-unit id="sac43cb9690260b86">
<source>UID start number</source>
<target>UID 시작 번호</target>
</trans-unit>
<trans-unit id="s60edbcfac8ed1f90">
<source>The start for uidNumbers, this number is added to the user.Pk to make sure that the numbers aren't too low for POSIX users. Default is 2000 to ensure that we don't collide with local users uidNumber</source>
<target>UID의 시작값입니다. 이 숫자는 user.Pk에 추가되어 POSIX 사용자의 숫자가 너무 낮지 않도록 합니다. 기본값은 2000으로 설정되어 로컬 사용자 UID와 충돌하지 않도록 합니다.</target>
</trans-unit>
<trans-unit id="s5acb607b40356974">
<source>GID start number</source>
<target>GID 시작 번호</target>
</trans-unit>
<trans-unit id="s1c8e9816dcae6d9c">
<source>The start for gidNumbers, this number is added to a number generated from the group.Pk to make sure that the numbers aren't too low for POSIX groups. Default is 4000 to ensure that we don't collide with local groups or users primary groups gidNumber</source>
<target>GID의 시작값입니다. 이 숫자는 group.Pk에서 생성된 숫자에 추가되어 POSIX 그룹의 숫자가 너무 낮지 않도록 합니다. 기본값은 4000으로 설정되어 로컬 그룹 또는 사용자의 기본 그룹 gidNumber와 충돌하지 않도록 합니다.</target>
<source>Configure how long access codes are valid for.</source>
<target>액세스 코드가 유효한 기간을 구성합니다.</target>
</trans-unit>
<trans-unit id="sbea3db12fd799210">
<source>Access Token validity</source>
<target>액세스 토큰 유효기간</target>
</trans-unit>
<trans-unit id="s72559845d38bf688">
<source>Configure how long access tokens are valid for.</source>
<target>액세스 토큰이 유효한 기간을 구성합니다.</target>
</trans-unit>
<trans-unit id="s821f6014c1a435b9">
<source>Refresh Token validity</source>
<target>토큰 유효 기간 갱신</target>
</trans-unit>
<trans-unit id="s00c2db16ea9bc263">
<source>Configure how long refresh tokens are valid for.</source>
<target>갱신한 토큰의 만료 날짜를 구성합니다.</target>
</trans-unit>
<trans-unit id="s2e3ef41a0edd8608">
<source>Scopes</source>
<target>스코프</target>
</trans-unit>
<trans-unit id="s3a3fae99373ce56b">
<source>Select which scopes can be used by the client. The client still has to specify the scope to access the data.</source>
<target>클라이언트가 사용할 수 있는 범위를 선택하세요. 클라이언트는 여전히 데이터에 액세스하려면 범위를 명시적으로 지정해야 합니다.</target>
</trans-unit>
<trans-unit id="sffd2e553143d1b0e">
<source>Hold control/command to select multiple items.</source>
<target>여러 항목을 선택하려면 Ctrl/Command를 누르세요.</target>
</trans-unit>
<trans-unit id="s26bf2730430efbea">
<source>Subject mode</source>
<target>Subject 모드</target>
</trans-unit>
<trans-unit id="sccc47f82044453f9">
<source>Based on the User's hashed ID</source>
<target>사용자의 해시된 ID 기반</target>
</trans-unit>
<trans-unit id="sbd5be4fb7442a34c">
<source>Based on the User's ID</source>
<target>사용자의 ID 기반</target>
</trans-unit>
<trans-unit id="sc9cf9ecaf9e5d67e">
<source>Based on the User's UUID</source>
<target>사용자의 UUID 기반</target>
</trans-unit>
<trans-unit id="s4291727352c4f295">
<source>Based on the User's username</source>
<target>사용자의 사용자이름 기반</target>
</trans-unit>
<trans-unit id="sd62cfc27ad4aa33b">
<source>Based on the User's Email</source>
<target>사용자의 이메일 기반</target>
</trans-unit>
<trans-unit id="s55eb75bedf96be0f">
<source>This is recommended over the UPN mode.</source>
<target>이 모드는 UPN보다 권장합니다.</target>
</trans-unit>
<trans-unit id="sf80e9547166117e6">
<source>Based on the User's UPN</source>
<target>사용자의 UPN 기반</target>
</trans-unit>
<trans-unit id="sde949d0ef44572eb">
<source>Requires the user to have a 'upn' attribute set, and falls back to hashed user ID. Use this mode only if you have different UPN and Mail domains.</source>
<target>사용자에게 'upn' 속성을 설정해야 하며, 해시된 사용자 ID로 대체됩니다. UPN과 메일 도메인이 다른 경우에만 이 모드를 사용하십시오.</target>
</trans-unit>
<trans-unit id="s9f23ed1799b4d49a">
<source>Configure what data should be used as unique User Identifier. For most cases, the default should be fine.</source>
<target>고유한 사용자 식별자로 사용할 데이터를 구성합니다. 대부분의 경우 기본값을 사용하는 것이 적절합니다.</target>
</trans-unit>
<trans-unit id="s17d1e337f6c11c1e">
<source>Include claims in id_token</source>
<target>Id_token에 요청 포함</target>
</trans-unit>
<trans-unit id="sbf41e0db12834133">
<source>Include User claims from scopes in the id_token, for applications that don't access the userinfo endpoint.</source>
<target>사용자 정보 엔드포인트에 액세스하지 않는 애플리케이션의 경우, 범위의 사용자 선언을 Id_token에 포함하세요.</target>
</trans-unit>
<trans-unit id="s850a58c683682809">
<source>Issuer mode</source>
<target>Issuer 모드</target>
</trans-unit>
<trans-unit id="sde56783222b527d6">
<source>Each provider has a different issuer, based on the application slug</source>
<target>각 공급자는 애플리케이션 슬러그를 기반으로 한 다른 발급자를 가짐</target>
</trans-unit>
<trans-unit id="s8d32d7b9e8ca60b1">
<source>Same identifier is used for all providers</source>
<target>모든 공급자에 동일한 식별자를 사용</target>
</trans-unit>
<trans-unit id="s37d9155b9f4cc7bd">
<source>Configure how the issuer field of the ID Token should be filled.</source>
<source>This provider will behave like a transparent reverse-proxy, except requests must be authenticated. If your upstream application uses HTTPS, make sure to connect to the outpost using HTTPS as well.</source>
<target>이 공급자는 투명한 리버스 프록시처럼 동작하지만 요청은 반드시 인증되어야 합니다. 업스트림 애플리케이션이 HTTPS를 사용하는 경우 아웃포스트에 연결할 때도 HTTPS를 사용해야합니다.</target>
</trans-unit>
<trans-unit id="sa29b5680cfafacc8">
<source>External host</source>
<target>외부 호스트</target>
</trans-unit>
<trans-unit id="s764bccb30868bf62">
<source>The external URL you'll access the application at. Include any non-standard port.</source>
<target>애플리케이션에서 엑세스할 외부 URL입니다. 비표준 포트를 포함해야합니다.</target>
</trans-unit>
<trans-unit id="scb317851cbcc6b12">
<source>Internal host</source>
<target>내부 호스트</target>
</trans-unit>
<trans-unit id="sf05e384059a0a7c1">
<source>Upstream host that the requests are forwarded to.</source>
<target>요청을 전달해야하는 업스트림 호스트입니다.</target>
</trans-unit>
<trans-unit id="s3d34068a31cab30b">
<source>Internal host SSL Validation</source>
<target>내부 호스트 SSL 유효성 검사</target>
</trans-unit>
<trans-unit id="s4a26798e1c3c37dd">
<source>Validate SSL Certificates of upstream servers.</source>
<target>업스트림 서버의 SSL 인증서를 유효성 검사합니다.</target>
</trans-unit>
<trans-unit id="s44c90273f08fb718">
<source>Use this provider with nginx's auth_request or traefik's forwardAuth. Only a single provider is required per root domain. You can't do per-application authorization, but you don't have to create a provider for each application.</source>
<target>이 공급자는 Nginx의 auth_request 또는 Traefik의 forwardAuth와 함께 사용됩니다. 루트 도메인 당 하나의 공급자만 필요합니다. 응용 프로그램 당 인증은 수행할 수 없지만 각 응용 프로그램마다 별도의 공급자를 생성할 필요는 없습니다.</target>
</trans-unit>
<trans-unit id="sf55d28d4dff0e41b">
<source>An example setup can look like this:</source>
<target>예제 설정은 다음과 같습니다:</target>
</trans-unit>
<trans-unit id="sb4a1d1c19438e929">
<source>authentik running on auth.example.com</source>
<target>authentik이 auth.example.com에서 실행 중인 경우</target>
</trans-unit>
<trans-unit id="s68f935c9ca792016">
<source>app1 running on app1.example.com</source>
<target>app1은 app1.example.com에서 실행 중인 경우</target>
</trans-unit>
<trans-unit id="sf813a72d8fadd765">
<source>In this case, you'd set the Authentication URL to auth.example.com and Cookie domain to example.com.</source>
<target>위의 상황에서는, 인증 URL을 auth.example.com으로 설정하고 쿠키 도메인을 example.com으로 설정합니다.</target>
</trans-unit>
<trans-unit id="s31d15c6f16951464">
<source>Authentication URL</source>
<target>인증 URL</target>
</trans-unit>
<trans-unit id="sa03fe48e892df2d8">
<source>The external URL you'll authenticate at. The authentik core server should be reachable under this URL.</source>
<target>외부 호스트는 인증을 수행할 외부 URL입니다. authentik 코어 서버는 이 URL 아래에 도달 가능해야 합니다.</target>
</trans-unit>
<trans-unit id="s7def067ed3ad3ad9">
<source>Cookie domain</source>
<target>쿠키 도메인</target>
</trans-unit>
<trans-unit id="s211b75e868072162">
<source>Set this to the domain you wish the authentication to be valid for. Must be a parent domain of the URL above. If you're running applications as app1.domain.tld, app2.domain.tld, set this to 'domain.tld'.</source>
<target>이를 원하는 인증이 유효한 도메인으로 설정하세요. 위의 URL의 상위 도메인이어야 합니다. 예를 들어 app1.domain.tld, app2.domain.tld와 같은 응용 프로그램을 실행 중이라면 'domain.tld'로 설정하세요.</target>
</trans-unit>
<trans-unit id="s2345170f7e272668">
<source>Unknown proxy mode</source>
<target>알려지지 않은 프록시 모드</target>
</trans-unit>
<trans-unit id="s7c10976de6411844">
<source>Token validity</source>
<target>토큰 수명</target>
</trans-unit>
<trans-unit id="s3e87ce98ba3c4d80">
<source>Configure how long tokens are valid for.</source>
<target>토큰이 유효한 기간을 구성합니다.</target>
</trans-unit>
<trans-unit id="sd539548ca4c71619">
<source>Additional scopes</source>
<target>스코프 추가</target>
</trans-unit>
<trans-unit id="s8f12575f694e85a2">
<source>Additional scope mappings, which are passed to the proxy.</source>
<target>프록시에 전달되는 추가 스코프를 매핑하세요.</target>
</trans-unit>
<trans-unit id="s93cea6ca1f93349d">
<source>Unauthenticated URLs</source>
<target>Unauthenticated URLs</target>
</trans-unit>
<trans-unit id="sc4508175bf6b09dd">
<source>Unauthenticated Paths</source>
<target>Unauthenticated Paths</target>
</trans-unit>
<trans-unit id="sc9fc206433f67588">
<source>Regular expressions for which authentication is not required. Each new line is interpreted as a new expression.</source>
<target>인증이 필요하지 않은 정규 표현식. 각 새 줄은 새 표현식으로 해석됩니다.</target>
</trans-unit>
<trans-unit id="sd503fabef9691134">
<source>When using proxy or forward auth (single application) mode, the requested URL Path is checked against the regular expressions. When using forward auth (domain mode), the full requested URL including scheme and host is matched against the regular expressions.</source>
<target>프록시 또는 forward auth(단일 응용 프로그램) 모드를 사용할 때 요청된 URL 경로는 정규 표현식과 일치하는지 확인합니다. forward auth(도메인 모드)을 사용할 때는 스킴 및 호스트를 포함한 전체 요청된 URL이 정규 표현식과 일치해야합니다.</target>
</trans-unit>
<trans-unit id="sb488dee0be434f7e">
<source>Authentication settings</source>
<target>인증 설정</target>
</trans-unit>
<trans-unit id="s23cee624c735f266">
<source>Intercept header authentication</source>
<target>Authorization header 가로채기</target>
</trans-unit>
<trans-unit id="sc007cca5af67eae0">
<source>When enabled, authentik will intercept the Authorization header to authenticate the request.</source>
<target>활성화 하면, authentik은 요청을 인증하기 위해 Authorization 헤더를 가로챕니다.</target>
</trans-unit>
<trans-unit id="s36e630ba56617556">
<source>Send HTTP-Basic Authentication</source>
<target>HTTP-Basic 인증 전송</target>
</trans-unit>
<trans-unit id="s9d5796a4b9b7560e">
<source>Send a custom HTTP-Basic Authentication header based on values from authentik.</source>
<target>authentik의 값에 기반하여 사용자 정의 HTTP-Basic 인증 헤더를 전송합니다.</target>
</trans-unit>
<trans-unit id="s11204eeb1e27ea8f">
<source>ACS URL</source>
<target>ACS URL</target>
</trans-unit>
<trans-unit id="sb7a30abc1dcf6c36">
<source>Issuer</source>
<target>발급자</target>
</trans-unit>
<trans-unit id="sf54c562d8a10ce77">
<source>Also known as EntityID.</source>
<target>EntityID로도 표현하기도 합니다.</target>
</trans-unit>
<trans-unit id="s991b750e2d5c4234">
<source>Service Provider Binding</source>
<target>서비스 공급자 바인딩</target>
</trans-unit>
<trans-unit id="sd8f220c999726151">
<source>Redirect</source>
<target>리디렉트</target>
</trans-unit>
<trans-unit id="sb357ea19a722d827">
<source>Post</source>
<target>포스트</target>
</trans-unit>
<trans-unit id="s4e28e2899e08a5f8">
<source>Determines how authentik sends the response back to the Service Provider.</source>
<target>authentik이 응답을 서비스 공급자에 다시 전송하는 방식을 결정합니다.</target>
</trans-unit>
<trans-unit id="sd5a4b41c6c883b03">
<source>Audience</source>
<target>수신처</target>
</trans-unit>
<trans-unit id="sc741d9ebe07ad103">
<source>Signing Certificate</source>
<target>서명 인증서</target>
</trans-unit>
<trans-unit id="sd6c3ddb62de0e8f7">
<source>Certificate used to sign outgoing Responses going to the Service Provider.</source>
<target>서비스 공급자에게 전송되는 응답을 서명하는 데 사용되는 인증서입니다.</target>
</trans-unit>
<trans-unit id="s5be3b0567172e415">
<source>Verification Certificate</source>
<target>검증 인증서</target>
</trans-unit>
<trans-unit id="s7c27e113f90a89e0">
<source>When selected, incoming assertion's Signatures will be validated against this certificate. To allow unsigned Requests, leave on default.</source>
<target>선택한 경우, 들어오는 요청의 서명은 이 인증서를 기반으로 유효성을 검사합니다. 서명되지 않은 요청을 허용하려면, 기본값으로 유지하세요.</target>
</trans-unit>
<trans-unit id="se6d950402810c34f">
<source>Property mappings</source>
<target>속성 매핑</target>
</trans-unit>
<trans-unit id="s1a2797874b7fe852">
<source>NameID Property Mapping</source>
<target>NameID 속성 매핑</target>
</trans-unit>
<trans-unit id="s256b8452664ccae4">
<source>Configure how the NameID value will be created. When left empty, the NameIDPolicy of the incoming request will be respected.</source>
<target>NameID 값이 어떻게 생성될지 구성합니다. 비워 둘 경우, 들어오는 요청의 NameIDPolicy를 존중합니다.</target>
</trans-unit>
<trans-unit id="s9f91cc8bcfabb40f">
<source>Assertion valid not before</source>
<target>다음 시간 이전의 어설션은 무효</target>
</trans-unit>
<trans-unit id="s733f83ff9d50da30">
<source>Configure the maximum allowed time drift for an assertion.</source>
<target>어설션에 대한 최대 허용 시간 드리프트를 구성합니다.</target>
</trans-unit>
<trans-unit id="s2af5754090898640">
<source>Assertion valid not on or after</source>
<target>다음 시간의 어설션 혹은 그 이후는 무효</target>
</trans-unit>
<trans-unit id="s43c1f927936f0a02">
<source>Assertion not valid on or after current time + this value.</source>
<target>어설션은 현재 시간 이후에 무효가 되거나, 현재 시간 + 값에 무효가 됩니다.</target>
</trans-unit>
<trans-unit id="sad8550b8731518d8">
<source>Session valid not on or after</source>
<target>다음 시간의 세션 혹은 그 이후는 무효</target>
</trans-unit>
<trans-unit id="s0dd00fbaba08748a">
<source>Session not valid on or after current time + this value.</source>
<target>세션은 현재 시간 이후에 무효가 되거나, 현재 시간 + 값에 무효가 됩니다.</target>
</trans-unit>
<trans-unit id="s2a0f60e74b478804">
<source>Digest algorithm</source>
<target>해시 알고리즘</target>
</trans-unit>
<trans-unit id="s693d975d38ff0214">
<source>Signature algorithm</source>
<target>서명 알고리즘</target>
</trans-unit>
<trans-unit id="sd1a5560fde6f2271">
<source>Successfully imported provider.</source>
<target>성공적으로 공급자를 불러왔습니다.</target>
</trans-unit>
<trans-unit id="s252a52330d32b900">
<source>Metadata</source>
<target>메타데이터</target>
</trans-unit>
<trans-unit id="s7181a5504472e856">
<source>Apply changes</source>
<target>변경사항 저장</target>
</trans-unit>
<trans-unit id="s5e8250fb85d64c23">
<source>Close</source>
<target>닫기</target>
</trans-unit>
<trans-unit id="sad59707375956ad2">
<source>Finish</source>
<target>마침</target>
</trans-unit>
<trans-unit id="sc16e00a7a8b2fde2">
<source>Back</source>
<target>뒤로</target>
</trans-unit>
<trans-unit id="sd5903cc8de68b3fc">
<source>No form found</source>
<target>찾을 수 없음</target>
</trans-unit>
<trans-unit id="s45935843b1b5b496">
<source>Form didn't return a promise for submitting</source>
<target>양식에서 제출하기로 한 것을 반환하지 않음</target>
</trans-unit>
<trans-unit id="s74475586afc1fb0f">
<source>Select type</source>
<target>유형 선택</target>
</trans-unit>
<trans-unit id="s0b3bf19b31dd6bac">
<source>Try the new application wizard</source>
<target>새로운 애플리케이션 마법사 사용</target>
</trans-unit>
<trans-unit id="sa18e1c6e0e6f16cc">
<source>The new application wizard greatly simplifies the steps required to create applications and providers.</source>
<target>새로운 애플리케이션 마법사는 애플리케이션 및 공급자 생성에 필요한 스테이지를 크게 간소화합니다.</target>
<source>No policies are currently bound to this object.</source>
<target>현재 이 오브젝트에 바인딩된 정책이 없습니다.</target>
</trans-unit>
<trans-unit id="sddb040c47daae56b">
<source>Bind existing policy</source>
<target>기존 정책 바인딩</target>
</trans-unit>
<trans-unit id="saa855c61e0403fe6">
<source>Warning: Application is not used by any Outpost.</source>
<target>경고: 애플리케이션이 어떤 Outpost에서도 사용하지 않습니다.</target>
</trans-unit>
<trans-unit id="sb6cbd4f92ebaf5d8">
<source>Related</source>
<target>관련</target>
</trans-unit>
<trans-unit id="sc92ea8fbf9ba06a7">
<source>Backchannel Providers</source>
<target>백채널 공급자</target>
</trans-unit>
<trans-unit id="sd71081c23d1cd38b">
<source>Check access</source>
<target>액세스 확인</target>
</trans-unit>
<trans-unit id="s42cbd8dca939a9c7">
<source>Check</source>
<target>확인</target>
</trans-unit>
<trans-unit id="sf22f7f8a9309b4ed">
<source>Check Application access</source>
<target>애플리케이션 액세스 확인</target>
</trans-unit>
<trans-unit id="s2474e7fb1aec9f05">
<source>Test</source>
<target>테스트</target>
</trans-unit>
<trans-unit id="s512957aa09384646">
<source>Launch</source>
<target>실행</target>
</trans-unit>
<trans-unit id="sed02f831e653deb3">
<source>Logins over the last week (per 8 hours)</source>
<target>지난 한 주 동안의 로그인 횟수(8시간당)</target>
</trans-unit>
<trans-unit id="s2b1bc31276c4c477">
<source>Policy / Group / User Bindings</source>
<target>정책 / 그룹 / 사용자 바인딩</target>
</trans-unit>
<trans-unit id="s473f0143efa3f706">
<source>These policies control which users can access this application.</source>
<target>이러한 정책은 이 애플리케이션에 액세스할 수 있는 사용자를 제어합니다.</target>
</trans-unit>
<trans-unit id="s24875d5475e82526">
<source>Successfully updated source.</source>
<target>소스를 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="s60d891ed3ee9ebc5">
<source>Successfully created source.</source>
<target>소스를 성공적으로 만들었습니다.</target>
</trans-unit>
<trans-unit id="s8af7239354f7e7b6">
<source>Sync users</source>
<target>사용자 동기화</target>
</trans-unit>
<trans-unit id="sd80b0b8aeae3abe3">
<source>User password writeback</source>
<target>사용자 비밀번호 재설정</target>
</trans-unit>
<trans-unit id="s2b952e9dc99cbded">
<source>Login password is synced from LDAP into authentik automatically. Enable this option only to write password changes in authentik back to LDAP.</source>
<target>로그인 비밀번호가 LDAP에서 인증으로 자동 동기화됩니다. 이 옵션은 인증에서 변경된 비밀번호를 LDAP에 다시 쓰려는 경우에만 사용하도록 설정합니다.</target>
</trans-unit>
<trans-unit id="saf7ce4165a1025f6">
<source>Sync groups</source>
<target>그룹 동기화</target>
</trans-unit>
<trans-unit id="s2035f889f576bca6">
<source>Connection settings</source>
<target>연결 설정</target>
</trans-unit>
<trans-unit id="s0a72e65aef45b1e8">
<source>Server URI</source>
<target>서버 URI</target>
</trans-unit>
<trans-unit id="sa599dbe5776897ad">
<source>Specify multiple server URIs by separating them with a comma.</source>
<target>여러 서버 URI를 쉼표로 구분하여 지정합니다.</target>
</trans-unit>
<trans-unit id="se36b55dfcf5dc80b">
<source>Enable StartTLS</source>
<target>StartTLS 사용</target>
</trans-unit>
<trans-unit id="s33683c3b1dbaf264">
<source>To use SSL instead, use 'ldaps://' and disable this option.</source>
<target>대신 SSL을 사용하려면 'ldaps://'를 사용하고 이 옵션을 비활성화하세요.</target>
</trans-unit>
<trans-unit id="s2221fef80f4753a2">
<source>TLS Verification Certificate</source>
<target>TLS 인증 인증서</target>
</trans-unit>
<trans-unit id="sb8c13bd58191cea2">
<source>When connecting to an LDAP Server with TLS, certificates are not checked by default. Specify a keypair to validate the remote certificate.</source>
<target>TLS를 사용하여 LDAP 서버에 연결할 때 인증서는 기본적으로 확인되지 않습니다. 원격 인증서의 유효성을 검사할 키쌍을 지정합니다.</target>
</trans-unit>
<trans-unit id="sb7684e2910a33a1f">
<source>Bind CN</source>
<target>CN 바인딩</target>
</trans-unit>
<trans-unit id="s3de6db803012016a">
<source>LDAP Attribute mapping</source>
<target>LDAP 특성 매핑</target>
</trans-unit>
<trans-unit id="s7c05ee41d634aa45">
<source>Property mappings used to user creation.</source>
<target>사용자 생성에 사용되는 특성 매핑입니다.</target>
</trans-unit>
<trans-unit id="s94333971a07803b9">
<source>Additional settings</source>
<target>추가 설정</target>
</trans-unit>
<trans-unit id="sd14a19a19d507f9e">
<source>Parent group for all the groups imported from LDAP.</source>
<target>LDAP에서 가져온 모든 그룹의 상위 그룹입니다.</target>
</trans-unit>
<trans-unit id="sfbc59ff17a73503d">
<source>User path</source>
<target>사용자 경로</target>
</trans-unit>
<trans-unit id="sd18170637295bace">
<source>Addition User DN</source>
<target>사용자 DN 추가</target>
</trans-unit>
<trans-unit id="s9ae089fd248e72db">
<source>Additional user DN, prepended to the Base DN.</source>
<target>기본 DN 앞에 추가 사용자 DN을 추가합니다.</target>
</trans-unit>
<trans-unit id="s5944355d69db1fb8">
<source>Addition Group DN</source>
<target>추가 그룹 DN</target>
</trans-unit>
<trans-unit id="sfae9f4ea5749a36b">
<source>Additional group DN, prepended to the Base DN.</source>
<target>기본 DN 앞에 추가 그룹 DN을 붙입니다.</target>
</trans-unit>
<trans-unit id="s66ffc06300964849">
<source>User object filter</source>
<target>사용자 오브젝트 필터</target>
</trans-unit>
<trans-unit id="s1c2a173db0e1ec61">
<source>Consider Objects matching this filter to be Users.</source>
<target>이 필터와 일치하는 오브젝트를 사용자로 간주합니다.</target>
</trans-unit>
<trans-unit id="s2ec94a7c7f5bcd1b">
<source>Group object filter</source>
<target>그룹 오브젝트 필터</target>
</trans-unit>
<trans-unit id="saf5eb7596b3a355b">
<source>Consider Objects matching this filter to be Groups.</source>
<source>Field which contains members of a group. Note that if using the "memberUid" field, the value is assumed to contain a relative distinguished name. e.g. 'memberUid=some-user' instead of 'memberUid=cn=some-user,ou=groups,...'</source>
<target>그룹 구성원이 포함된 필드입니다. 'memberUid' 필드를 사용하는 경우 값에 상대적인 고유 이름이 포함된 것으로 가정합니다 (예:'memberUid=some-user' 대신 'memberUid=cn=some-user,ou=groups,...').</target>
</trans-unit>
<trans-unit id="s026555347e589f0e">
<source>Object uniqueness field</source>
<target>오브젝트 고유 필드</target>
</trans-unit>
<trans-unit id="s24211f319e5b7e98">
<source>Field which contains a unique Identifier.</source>
<target>고유 식별자가 포함된 필드입니다.</target>
</trans-unit>
<trans-unit id="s900b0d85b872d134">
<source>Link users on unique identifier</source>
<target>고유 식별자에 사용자 연결</target>
</trans-unit>
<trans-unit id="s6c70a73265e14521">
<source>Link to a user with identical email address. Can have security implications when a source doesn't validate email addresses</source>
<target>이메일 주소가 동일한 사용자에게 링크합니다. 소스에서 이메일 주소의 유효성을 검사하지 않을 경우 보안에 영향을 미칠 수 있습니다</target>
</trans-unit>
<trans-unit id="s995535e7af30d754">
<source>Use the user's email address, but deny enrollment when the email address already exists</source>
<target>사용자의 이메일 주소를 사용하되, 이메일 주소가 이미 존재하는 경우 등록을 거부합니다.</target>
</trans-unit>
<trans-unit id="s542ecb4130f6cea5">
<source>Link to a user with identical username. Can have security implications when a username is used with another source</source>
<target>동일한 사용자 아이디를 가진 사용자와 연결합니다. 사용자 아이디가 다른 소스와 함께 사용될 경우 보안에 영향을 미칠 수 있습니다</target>
</trans-unit>
<trans-unit id="s2a1debf34e5aeba4">
<source>Use the user's username, but deny enrollment when the username already exists</source>
<target>사용자의 사용자 아이디를 사용하되, 사용자 아이디가 이미 존재하는 경우 등록을 거부합니다</target>
</trans-unit>
<trans-unit id="s81ce0d54727f42d2">
<source>Unknown user matching mode</source>
<target>알 수 없는 사용자 매칭 모드</target>
</trans-unit>
<trans-unit id="sd04376c4216c921f">
<source>URL settings</source>
<target>URL 설정</target>
</trans-unit>
<trans-unit id="s872d0e88ab34ed83">
<source>Authorization URL</source>
<target>인가(Authorization) URL</target>
</trans-unit>
<trans-unit id="see3ff55262fd6500">
<source>URL the user is redirect to to consent the authorization.</source>
<target>사용자가 승인을 위해 리디렉션되는 URL입니다.</target>
</trans-unit>
<trans-unit id="sb932dead79567c7b">
<source>Access token URL</source>
<target>액세스 토큰 URL</target>
</trans-unit>
<trans-unit id="s88b8a2892635a2fc">
<source>URL used by authentik to retrieve tokens.</source>
<target>토큰을 검색하기 위해 authentik에서 사용하는 URL입니다.</target>
</trans-unit>
<trans-unit id="s69bd313dd12fc2f3">
<source>Profile URL</source>
<target>프로필 URL</target>
</trans-unit>
<trans-unit id="sa8d83cd8023e8e4d">
<source>URL used by authentik to get user information.</source>
<target>사용자 정보를 가져오기 위해 authentik에서 사용하는 URL입니다.</target>
</trans-unit>
<trans-unit id="sc7707b3ba3a2a7ca">
<source>Request token URL</source>
<target>토큰 요청 URL</target>
</trans-unit>
<trans-unit id="s3926da5b20cdf3b6">
<source>URL used to request the initial token. This URL is only required for OAuth 1.</source>
<target>초기 토큰을 요청하는 데 사용되는 URL입니다. 이 URL은 OAuth 1에서만 필요합니다.</target>
</trans-unit>
<trans-unit id="s199b55513a739f43">
<source>OIDC Well-known URL</source>
<target>OIDC Well-known URL</target>
</trans-unit>
<trans-unit id="s8b149b30b5b523ef">
<source>OIDC well-known configuration URL. Can be used to automatically configure the URLs above.</source>
<target>OIDC의 well-known 구성 URL입니다. 위의 URL을 자동으로 구성하는 데 사용할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s9db2c836ade1339c">
<source>OIDC JWKS URL</source>
<target>OIDC JWKS URL</target>
</trans-unit>
<trans-unit id="s4b2a1b657c160f5b">
<source>JSON Web Key URL. Keys from the URL will be used to validate JWTs from this source.</source>
<target>JSON 웹 키 URL입니다. URL의 키는 이 소스의 JWT를 검증하는 데 사용됩니다.</target>
</trans-unit>
<trans-unit id="s2df0b65125600de9">
<source>OIDC JWKS</source>
<target>OIDC JWKS</target>
</trans-unit>
<trans-unit id="s02de8d9e8583b480">
<source>Raw JWKS data.</source>
<target>Raw JWKS 데이터.</target>
</trans-unit>
<trans-unit id="s81a87652ade099e4">
<source>User matching mode</source>
<target>사용자 매칭 모드</target>
</trans-unit>
<trans-unit id="s485c05d34eb00415">
<source>Delete currently set icon.</source>
<target>현재 설정한 아이콘을 삭제합니다.</target>
</trans-unit>
<trans-unit id="se8987bdfb35e46b2">
<source>Consumer key</source>
<target>고객 키</target>
</trans-unit>
<trans-unit id="sabaf0061f7e41b0b">
<source>Consumer secret</source>
<target>고객 비밀</target>
</trans-unit>
<trans-unit id="sa61966cd83b4924c">
<source>Additional scopes to be passed to the OAuth Provider, separated by space. To replace existing scopes, prefix with *.</source>
<target>OAuth 공급자에게 전달할 추가 범위를 공백으로 구분하여 입력합니다. 기존 범위를 바꾸려면 접두사 앞에 *를 붙입니다.</target>
</trans-unit>
<trans-unit id="s1cc0e66dbd2b5502">
<source>Flow settings</source>
<target>플로우 설정</target>
</trans-unit>
<trans-unit id="sfe6977a3aea3ee6e">
<source>Flow to use when authenticating existing users.</source>
<target>기존 사용자를 인증할 때 사용할 플로우입니다.</target>
</trans-unit>
<trans-unit id="s2801a48ceac691b3">
<source>Enrollment flow</source>
<target>등록 플로우</target>
</trans-unit>
<trans-unit id="s5d0a14d29ebad561">
<source>Flow to use when enrolling new users.</source>
<target>새 사용자를 등록할 때 사용할 플로우입니다.</target>
</trans-unit>
<trans-unit id="s91f389c796720a81">
<source>Load servers</source>
<target>서버 로드</target>
</trans-unit>
<trans-unit id="s24f405197ede5ebb">
<source>Re-authenticate with plex</source>
<target>Plex로 다시 인증하기</target>
</trans-unit>
<trans-unit id="sc297b2e13c28ecf9">
<source>Allow friends to authenticate via Plex, even if you don't share any servers</source>
<target>친구들이 Plex를 통해 인증할 수 있도록 허용하십시오. 심지어 서버를 공유하지 않는 경우에도 해당됩니다.</target>
</trans-unit>
<trans-unit id="sfee91e08b8b47477">
<source>Allowed servers</source>
<target>Allowed servers</target>
</trans-unit>
<trans-unit id="s216eb300543edd91">
<source>Select which server a user has to be a member of to be allowed to authenticate.</source>
<target>사용자가 인증을 허용받기 위해 구성원이어야 하는 서버를 선택합니다.</target>
</trans-unit>
<trans-unit id="s31d7f3ba04d306a5">
<source>SSO URL</source>
<target>SSO URL</target>
</trans-unit>
<trans-unit id="s1d9d6c5b424fdc1f">
<source>URL that the initial Login request is sent to.</source>
<target>초기 로그인 요청을 전송할 URL입니다.</target>
</trans-unit>
<trans-unit id="sd94db2b8c85d10a6">
<source>SLO URL</source>
<target>SLO URL</target>
</trans-unit>
<trans-unit id="sc764ddf60b5149de">
<source>Optional URL if the IDP supports Single-Logout.</source>
<target>IDP가 단일 로그아웃을 지원하는 경우 선택적 URL입니다.</target>
</trans-unit>
<trans-unit id="se7430794fa89005a">
<source>Also known as Entity ID. Defaults the Metadata URL.</source>
<source>Post binding but the request is automatically sent and the user doesn't have to confirm.</source>
<target>바인딩을 게시하지만 요청이 자동으로 전송되므로 사용자가 확인할 필요가 없습니다.</target>
</trans-unit>
<trans-unit id="s968c90258dcf7562">
<source>Post binding</source>
<target>Post 바인딩</target>
</trans-unit>
<trans-unit id="se10bbf4cf861c81b">
<source>Signing keypair</source>
<target>서명 키쌍</target>
</trans-unit>
<trans-unit id="s838ed611b533b19e">
<source>Keypair which is used to sign outgoing requests. Leave empty to disable signing.</source>
<target>보내는 요청에 서명하는 데 사용되는 키쌍입니다. 서명을 사용하지 않으려면 비워 둡니다.</target>
</trans-unit>
<trans-unit id="s39c8c0bf4d927c9f">
<source> Allow IDP-initiated logins</source>
<target> IDP-initiated login 허용</target>
</trans-unit>
<trans-unit id="s65d507f1513c2f03">
<source>Allows authentication flows initiated by the IdP. This can be a security risk, as no validation of the request ID is done.</source>
<target>IdP에 의해 시작된 인증 플로우를 허용합니다. 요청 ID에 대한 유효성 검사가 수행되지 않으므로 보안 위험이 있을 수 있습니다.</target>
</trans-unit>
<trans-unit id="s297a2075bd7e40db">
<source>NameID Policy</source>
<target>NameID 정책</target>
</trans-unit>
<trans-unit id="s004e9a2c90f23900">
<source>Persistent</source>
<target>Persistent(영구)</target>
</trans-unit>
<trans-unit id="s38887b94b3320533">
<source>Email address</source>
<target>이메일 주소</target>
</trans-unit>
<trans-unit id="s2d34c87f67f66c6a">
<source>Windows</source>
<target>Windows</target>
</trans-unit>
<trans-unit id="s1665454e31e14941">
<source>X509 Subject</source>
<target>X509 Subject</target>
</trans-unit>
<trans-unit id="s0c3ac7f9383a8cfd">
<source>Transient</source>
<target>Transient(임시)</target>
</trans-unit>
<trans-unit id="s20a0ce62823bfa97">
<source>Delete temporary users after</source>
<target>다음 이후 임시 사용자를 삭제합니다.</target>
</trans-unit>
<trans-unit id="s3198c384c2f68b08">
<source>Time offset when temporary users should be deleted. This only applies if your IDP uses the NameID Format 'transient', and the user doesn't log out manually.</source>
<target>임시 사용자를 삭제해야 하는 시간 오프셋입니다. 이 설정은 IDP가 'Transient' NameID 형식을 사용하고 사용자가 수동으로 로그아웃하지 않는 경우에만 적용됩니다.</target>
</trans-unit>
<trans-unit id="sb32e9c1faa0b8673">
<source>Pre-authentication flow</source>
<target>사전 인증 플로우</target>
</trans-unit>
<trans-unit id="sa3c1f6ac5e63a70f">
<source>Flow used before authentication.</source>
<target>사전 인증에 사용되는 플로우입니다.</target>
</trans-unit>
<trans-unit id="se12969ade44cd2b6">
<source>New source</source>
<target>새 소스</target>
</trans-unit>
<trans-unit id="s19b09f4fc72175d1">
<source>Create a new source.</source>
<target>새 소스를 만듭니다.</target>
</trans-unit>
<trans-unit id="s6152026c364ad974">
<source>Sources of identities, which can either be synced into authentik's database, or can be used by users to authenticate and enroll themselves.</source>
<target>신원 소스는 인증 데이터베이스에 동기화하거나 사용자가 자신을 인증하고 등록하는 데 사용할 수 있습니다.</target>
<target>OAuth 소스 <x id="0" equiv-text="${this.source.name}"/></target>
</trans-unit>
<trans-unit id="se09d055771f3a11d">
<source>Generic OpenID Connect</source>
<target>일반 OpenID Connect</target>
</trans-unit>
<trans-unit id="s5c1dc164c89ac13e">
<source>Unknown provider type</source>
<target>Unknown provider type</target>
</trans-unit>
<trans-unit id="s355b21b89ce5d9c5">
<source>Details</source>
<target>상세</target>
</trans-unit>
<trans-unit id="s01088b6625d2443b">
<source>Callback URL</source>
<target>콜백 URL</target>
</trans-unit>
<trans-unit id="sb6d5146d5efb3058">
<source>Access Key</source>
<target>액세스 Key</target>
</trans-unit>
<trans-unit id="s065604a41e9d1584">
<source>Update OAuth Source</source>
<target>OAuth 소스 업데이트</target>
</trans-unit>
<trans-unit id="s7b576aa71acb36a6">
<source>Diagram</source>
<target>Diagram</target>
</trans-unit>
<trans-unit id="s587ba266269297ab">
<source>Policy Bindings</source>
<target>정책 바인딩</target>
</trans-unit>
<trans-unit id="s2feae323f46479f8">
<source>These bindings control which users can access this source.
You can only use policies here as access is checked before the user is authenticated.</source>
<target>이러한 바인딩은 이 소스에 액세스할 수 있는 사용자를 제어합니다.
사용자가 인증되기 전에 액세스가 확인되므로 여기에서만 정책을 사용할 수 있습니다.
</target>
</trans-unit>
<trans-unit id="se17fcb1f159ee382">
<source>Update Plex Source</source>
<target>Plex 소스 업데이트</target>
</trans-unit>
<trans-unit id="saa10777250a6deca">
<source>Update SAML Source</source>
<target>SAML 소스 업데이트</target>
</trans-unit>
<trans-unit id="s643d8f2e5e5e930d">
<source>Successfully updated mapping.</source>
<target>매핑을 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="sffeef5b119d8625c">
<source>Successfully created mapping.</source>
<target>매핑을 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="s1c33d22492029aba">
<source>Object field</source>
<target>오브젝트 필드</target>
</trans-unit>
<trans-unit id="s06df3c3b6a503da8">
<source>Field of the user object this value is written to.</source>
<target>이 값을 기록하는 사용자 객체의 필드입니다.</target>
</trans-unit>
<trans-unit id="sd39c5e998efecf93">
<source>SAML Attribute Name</source>
<target>SAML 특성 이름</target>
</trans-unit>
<trans-unit id="scf2790cf3ad89283">
<source>Attribute name used for SAML Assertions. Can be a URN OID, a schema reference, or a any other string. If this property mapping is used for NameID Property, this field is discarded.</source>
<target>SAML 어설션에 사용되는 특성(Attribute) 이름입니다. URN OID, 스키마 참조 또는 기타 문자열일 수 있습니다. 이 속성(Property) 매핑이 NameID 속성(Property)에 사용되는 경우 이 필드는 삭제됩니다.</target>
</trans-unit>
<trans-unit id="sab6d24c5ec8dc361">
<source>Friendly Name</source>
<target>Friendly Name</target>
</trans-unit>
<trans-unit id="s9f8aac89fe318acc">
<source>Optionally set the 'FriendlyName' value of the Assertion attribute.</source>
<target>선택적으로 어설션 특성(Attribute)의 'FriendlyName' 값을 설정합니다.</target>
</trans-unit>
<trans-unit id="s851c108679653d2a">
<source>Scope name</source>
<target>범위 이름</target>
</trans-unit>
<trans-unit id="s23fd4411419fca06">
<source>Scope which the client can specify to access these properties.</source>
<target>클라이언트가 이러한 속성(Property)에 액세스하도록 지정할 수 있는 범위입니다.</target>
</trans-unit>
<trans-unit id="s7754f0e34f27fb6e">
<source>Description shown to the user when consenting. If left empty, the user won't be informed.</source>
<target>동의 시 사용자에게 표시되는 설명입니다. 비워두면 사용자에게 알림이 표시되지 않습니다.</target>
</trans-unit>
<trans-unit id="sb6c3bf5489d7556e">
<source>Example context data</source>
<target>컨텍스트 데이터 예시</target>
</trans-unit>
<trans-unit id="s4a697f0b36c4fe83">
<source>Active Directory User</source>
<target>Active Directory 사용자</target>
</trans-unit>
<trans-unit id="s9277b90db38e1983">
<source>Active Directory Group</source>
<target>Active Directory 그룹</target>
</trans-unit>
<trans-unit id="sc2e03590269d5a10">
<source>New property mapping</source>
<target>새로운 속성(Property) 매핑</target>
</trans-unit>
<trans-unit id="s713e8666ed70f8b3">
<source>Create a new property mapping.</source>
<target>새 속성(Property) 매핑을 만듭니다.</target>
</trans-unit>
<trans-unit id="sce106606ae84d46f">
<source>Property Mappings</source>
<target>속성 매핑</target>
</trans-unit>
<trans-unit id="s271a7e04ff9865b1">
<source>Control how authentik exposes and interprets information.</source>
<target>Authentik이 정보를 표시하고 해석하는 방법을 제어합니다.</target>
</trans-unit>
<trans-unit id="s59dc0eda07f9e2b6">
<source>Property Mapping(s)</source>
<target>속성(Property) 매핑</target>
</trans-unit>
<trans-unit id="sa57c393736e2732c">
<source>Test Property Mapping</source>
<target>테스트 속성(Property) 매핑</target>
</trans-unit>
<trans-unit id="sc39fb3ff3753d5ab">
<source>Hide managed mappings</source>
<target>관리되는 매핑 숨김</target>
</trans-unit>
<trans-unit id="s476ffc07e6d66f18">
<source>Successfully updated token.</source>
<target>토큰을 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="s93c1e5fbe8184895">
<source>Successfully created token.</source>
<target>토큰을 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="s5fc4269c2addee61">
<source>Unique identifier the token is referenced by.</source>
<target>토큰이 참조하는 고유 식별자입니다.</target>
</trans-unit>
<trans-unit id="sb8bc2b8376c96a6b">
<source>Intent</source>
<target>인텐트</target>
</trans-unit>
<trans-unit id="sbd34d118bcb1aaf2">
<source>API Token</source>
<target>API 토큰</target>
</trans-unit>
<trans-unit id="se31d92bea7f3a186">
<source>Used to access the API programmatically</source>
<target>프로그래밍 방식으로 API에 액세스하는 데 사용됩니다.</target>
</trans-unit>
<trans-unit id="sfd586951c75eb291">
<source>App password.</source>
<target>앱 비밀번호.</target>
</trans-unit>
<trans-unit id="s59bf194136d0d13a">
<source>Used to login using a flow executor</source>
<target>플로우 실행기를 사용하여 로그인하는 데 사용</target>
</trans-unit>
<trans-unit id="s1b14062c44e5ef45">
<source>Expiring</source>
<target>만료 예정</target>
</trans-unit>
<trans-unit id="safcc54b2aedb1a17">
<source>If this is selected, the token will expire. Upon expiration, the token will be rotated.</source>
<source>Recovery link cannot be emailed, user has no email address saved.</source>
<target>복구 링크를 이메일로 보낼 수 없습니다. 사용자가 저장한 이메일 주소가 없습니다.</target>
</trans-unit>
<trans-unit id="s720594461542943f">
<source>Add User</source>
<target>사용자 추가</target>
</trans-unit>
<trans-unit id="s4c41f3f4c23e8eaa">
<source>Warning: This group is configured with superuser access. Added users will have superuser access.</source>
<target>경고: 이 그룹은 수퍼유저 액세스 권한으로 구성됩니다. 추가된 사용자는 수퍼유저 액세스 권한을 갖게 됩니다.</target>
</trans-unit>
<trans-unit id="scee721983b1c28d0">
<source>Add existing user</source>
<target>기존 사용자 추가</target>
</trans-unit>
<trans-unit id="sd600334ec2c39b74">
<source>Create user</source>
<target>사용자 생성</target>
</trans-unit>
<trans-unit id="s53ad3455d9523b54">
<source>Create User</source>
<target>사용자 생성</target>
</trans-unit>
<trans-unit id="s06c163334767a381">
<source>Create Service account</source>
<target>서비스 계정 생성</target>
</trans-unit>
<trans-unit id="sc744f3691efe310d">
<source>Hide service-accounts</source>
<target>서비스 계정 숨김</target>
</trans-unit>
<trans-unit id="secdb4b4c4e66aa38">
<source>Group Info</source>
<target>그룹 정보</target>
</trans-unit>
<trans-unit id="s005053d82b712e0a">
<source>Notes</source>
<target>참고</target>
</trans-unit>
<trans-unit id="s634448e4942cf452">
<source>Edit the notes attribute of this group to add notes here.</source>
<target>이 그룹의 노트 속성(Attribute)을 수정하여 여기에 노트를 추가합니다.</target>
</trans-unit>
<trans-unit id="s586d6bd2eca2da93">
<source>Users</source>
<target>사용자</target>
</trans-unit>
<trans-unit id="sca7cfe2bef51b2a5">
<source>Root</source>
<target>Root</target>
</trans-unit>
<trans-unit id="s3616cc78631f5893">
<source>Warning: You're about to delete the user you're logged in as (<x id="0" equiv-text="${shouldShowWarning.username}"/>). Proceed at your own risk.</source>
<source>authentik: Locale: Displays a list of locales authentik supports.</source>
<target>authentik: 로캘: authentik이 지원하는 로캘 목록을 표시합니다.</target>
</trans-unit>
<trans-unit id="saf84e7732a9e1336">
<source>Preview errors</source>
<target>미리보기 오류</target>
</trans-unit>
<trans-unit id="sb71ace8e9b35c749">
<source>Data preview</source>
<target>데이터 미리보기</target>
</trans-unit>
<trans-unit id="s4d53f4b7ff33bedd">
<source>Unique name of this field, used for selecting fields in prompt stages.</source>
<target>프롬프트 스테이지에서 필드를 선택하는 데 사용되는 스테이지의 고유 이름입니다.</target>
</trans-unit>
<trans-unit id="s3b58f8d2155ae90c">
<source>Field Key</source>
<target>필드 키</target>
</trans-unit>
<trans-unit id="s2b088ba65eb69b7e">
<source>Name of the form field, also used to store the value.</source>
<target>값을 저장하는 데 사용되는 양식 필드의 이름입니다.</target>
</trans-unit>
<trans-unit id="s662fcb3761ad9df7">
<source>When used in conjunction with a User Write stage, use attributes.foo to write attributes.</source>
<target>사용자 작성 스테이지와 함께 사용하는 경우 attributes.foo를 사용하여 속성을 작성합니다.</target>
</trans-unit>
<trans-unit id="s5590dbf7e425789d">
<source>Label</source>
<target>라벨</target>
</trans-unit>
<trans-unit id="s0c135eba6017d94f">
<source>Label shown next to/above the prompt.</source>
<target>프롬프트 옆/위에 표시되는 라벨입니다.</target>
</trans-unit>
<trans-unit id="sae5d87e99fe081e0">
<source>Required</source>
<target>필수</target>
</trans-unit>
<trans-unit id="s37dbfe2133b74d2d">
<source>Interpret placeholder as expression</source>
<target>자리 표시자를 정규표현식으로 해석</target>
</trans-unit>
<trans-unit id="s4a953e6234cb4808">
<source>When checked, the placeholder will be evaluated in the same way a property mapping is.
If the evaluation fails, the placeholder itself is returned.</source>
<target>이 옵션을 선택하면 특성(Attribute) 매핑과 동일한 방식으로 플레이스홀더가 평가됩니다.
평가에 실패하면 플레이스홀더 자체가 반환됩니다.</target>
</trans-unit>
<trans-unit id="sf90be97cb08f3d5a">
<source>Placeholder</source>
<target>Placeholder</target>
</trans-unit>
<trans-unit id="sf76ead4c4708dd06">
<source>Optionally provide a short hint that describes the expected input value.
When creating a fixed choice field, enable interpreting as expression and return a
list to return multiple choices.</source>
<target>옵션으로 예상되는 입력값을 설명하는 짧은 힌트를 제공할 수 있습니다.
고정 선택 필드를 만들 때, 식으로 해석을 활성화하고 여러 선택지를 반환하려면
목록을 반환하세요.</target>
</trans-unit>
<trans-unit id="saa7ba2057bd524a1">
<source>Interpret initial value as expression</source>
<target>초기값을 정규표현식으로 해석</target>
</trans-unit>
<trans-unit id="sd60415c7666859f0">
<source>When checked, the initial value will be evaluated in the same way a property mapping is.
If the evaluation fails, the initial value itself is returned.</source>
<target>선택한 경우, 초기 값은 속성 매핑과 동일한 방식으로 평가됩니다.
평가가 실패하면 초기 값 자체가 반환됩니다.</target>
</trans-unit>
<trans-unit id="sa9c7044d9fd1f3e6">
<source>Initial value</source>
<target>Initial value</target>
</trans-unit>
<trans-unit id="seab35681cbf36755">
<source>Optionally pre-fill the input with an initial value.
When creating a fixed choice field, enable interpreting as expression and
return a list to return multiple default choices.</source>
<target>옵션으로 입력을 초기 값으로 채울 수 있습니다.
고정 선택 필드를 만들 때 정규표현식으로 해석을 활성화하고
목록을 반환하여 여러 개의 기본 선택지를 반환합니다.</target>
</trans-unit>
<trans-unit id="s72c1c17a9bdc76ad">
<source>Help text</source>
<target>도움말 텍스트</target>
</trans-unit>
<trans-unit id="s584d1c38ad20d560">
<source>Any HTML can be used.</source>
<target>어떤 HTML이든 사용할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s2be6121210e2a2f8">
<source>Prompts</source>
<target>프롬프트</target>
</trans-unit>
<trans-unit id="s42fc6f4b64eff5d9">
<source>Single Prompts that can be used for Prompt Stages.</source>
<target>프롬프트 스테이지에 사용할 수 있는 단일 프롬프트입니다.</target>
</trans-unit>
<trans-unit id="s42a1ebe17efda727">
<source>Field</source>
<target>필드</target>
</trans-unit>
<trans-unit id="s41b105819b67ee7a">
<source>Stages</source>
<target>스테이지</target>
</trans-unit>
<trans-unit id="sec7443a45fd141e5">
<source>Prompt(s)</source>
<target>프롬프트</target>
</trans-unit>
<trans-unit id="scc733ba98740038a">
<source>Update Prompt</source>
<target>프롬프트 업데이트</target>
</trans-unit>
<trans-unit id="s61b6f3e6bc59c6dd">
<source>Create Prompt</source>
<target>프롬프트 생성</target>
</trans-unit>
<trans-unit id="sff5bb7742c2896c8">
<source>Target</source>
<target>타겟</target>
</trans-unit>
<trans-unit id="sae5da213b7f896ed">
<source>Stage</source>
<target>스테이지</target>
</trans-unit>
<trans-unit id="s0a61796c1956d32c">
<source>Evaluate when flow is planned</source>
<target>플로우가 계획될 때 평가</target>
</trans-unit>
<trans-unit id="sf533f13321fee530">
<source>Evaluate policies during the Flow planning process.</source>
<target>플로우 계획 프로세스 중에 정책을 평가합니다.</target>
</trans-unit>
<trans-unit id="s6336fa345e96dde9">
<source>Evaluate when stage is run</source>
<target>스테이지가 실행될 때 평가</target>
</trans-unit>
<trans-unit id="sff3b708e23bb96b2">
<source>Evaluate policies before the Stage is present to the user.</source>
<target>스테이지가 사용자에게 표시되기 전에 정책을 평가합니다.</target>
</trans-unit>
<trans-unit id="s0dc46deb8f181baf">
<source>Invalid response behavior</source>
<target>유효하지 않은 응답 동작</target>
</trans-unit>
<trans-unit id="seb0805249661d15b">
<source>Returns the error message and a similar challenge to the executor</source>
<target>실행자에게 오류 메시지와 유사한 챌린지를 반환합니다</target>
</trans-unit>
<trans-unit id="sd891d8463d0ebace">
<source>Restarts the flow from the beginning</source>
<target>플로우를 처음부터 다시 시작</target>
</trans-unit>
<trans-unit id="s6b9a1dd402750a8a">
<source>Restarts the flow from the beginning, while keeping the flow context</source>
<target>플로우 컨텍스트를 유지하면서 플로우를 처음부터 다시 시작합니다</target>
</trans-unit>
<trans-unit id="sbc88fb27a4c3b894">
<source>Configure how the flow executor should handle an invalid response to a challenge given by this bound stage.</source>
<target>이 바운드 스테이지에서 제공된 챌린지에 대한 유효하지 않은 응답을 플로우 실행기가 어떻게 처리해야 하는지 구성합니다.</target>
</trans-unit>
<trans-unit id="s916b32ac64ea2b05">
<source>Successfully updated stage.</source>
<target>스테이지를 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="s14c8f36e180d6bbc">
<source>Successfully created stage.</source>
<target>스테이지를 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="sf22a28f83cc45fcc">
<source>Stage used to configure a duo-based authenticator. This stage should be used for configuration flows.</source>
<target>duo-based 인증기를 구성하는 데 사용되는 스테이지입니다. 이 스테이지는 구성 플로우에 사용해야 합니다.</target>
</trans-unit>
<trans-unit id="s5adafce329aaa853">
<source>Authenticator type name</source>
<target>인증기 유형 이름</target>
</trans-unit>
<trans-unit id="s23e6a57201fba25e">
<source>Display name of this authenticator, used by users when they enroll an authenticator.</source>
<target>사용자가 인증기를 등록할 때 사용하는 이 인증가의 표시 이름입니다.</target>
</trans-unit>
<trans-unit id="s276d751eb7a186cc">
<source>API Hostname</source>
<target>API 호스트명</target>
</trans-unit>
<trans-unit id="s5b6b6e2cb884d59f">
<source>Duo Auth API</source>
<target>Duo Auth API</target>
</trans-unit>
<trans-unit id="s240ff02ce3a53dee">
<source>Integration key</source>
<target>연동 키</target>
</trans-unit>
<trans-unit id="s56fd9ed596c724fa">
<source>Secret key</source>
<target>비밀 키</target>
</trans-unit>
<trans-unit id="s88870d7e499e848b">
<source>Duo Admin API (optional)</source>
<target>Duo 관리자 API (선택사항)</target>
</trans-unit>
<trans-unit id="s7f13f4a2d0370cf6">
<source>When using a Duo MFA, Access or Beyond plan, an Admin API application can be created.
This will allow authentik to import devices automatically.</source>
<target>Duo MFA, Access 또는 Beyond 요금제를 사용하는 경우 관리자 API 애플리케이션을 만들 수 있습니다.
인증을 통해 디바이스를 자동으로 가져올 수 있습니다.</target>
</trans-unit>
<trans-unit id="s9a34d1520e320465">
<source>Stage-specific settings</source>
<target>스테이지별 설정</target>
</trans-unit>
<trans-unit id="s0dfc6838c9d07677">
<source>Configuration flow</source>
<target>플로우 구성</target>
</trans-unit>
<trans-unit id="sebf44d2471b608ad">
<source>Flow used by an authenticated user to configure this Stage. If empty, user will not be able to configure this stage.</source>
<target>인증된 사용자가 이 스테이지를 구성하는 데 사용하는 플로우입니다. 비어 있으면 사용자가 이 스테이지를 구성할 수 없습니다.</target>
</trans-unit>
<trans-unit id="s3baf512851453712">
<source>Twilio Account SID</source>
<target>Twilio 계정 SID</target>
</trans-unit>
<trans-unit id="sa738ce390bc24875">
<source>Get this value from https://console.twilio.com</source>
<target>이 값은 다음에서 가져오세요. https://console.twilio.com</target>
</trans-unit>
<trans-unit id="sa7b56a80ab1801f0">
<source>Twilio Auth Token</source>
<target>Twilio Auth 토큰</target>
</trans-unit>
<trans-unit id="sfe99a8caa70232ab">
<source>Authentication Type</source>
<target>인증 유형</target>
</trans-unit>
<trans-unit id="safd0363143a46a91">
<source>Basic Auth</source>
<target>Basic Auth</target>
</trans-unit>
<trans-unit id="sd06b47084fec0ec5">
<source>Bearer Token</source>
<target>Bearer 토큰</target>
</trans-unit>
<trans-unit id="sb1751a1411d6874f">
<source>External API URL</source>
<target>외부 API URL</target>
</trans-unit>
<trans-unit id="sbdc1176ff9f93da2">
<source>This is the full endpoint to send POST requests to.</source>
<target>POST 요청을 전송할 전체 엔드포인트입니다.</target>
</trans-unit>
<trans-unit id="s51da4de00984fe51">
<source>API Auth Username</source>
<target>API 인증 사용자명</target>
</trans-unit>
<trans-unit id="s293ab4331c1dd387">
<source>This is the username to be used with basic auth or the token when used with bearer token</source>
<target>Basic 인증에 사용할 사용자명 또는 무기명 토큰과 함께 사용할 경우 토큰입니다.</target>
</trans-unit>
<trans-unit id="s634d041fd954ab20">
<source>API Auth password</source>
<target>API Auth 비밀번호</target>
</trans-unit>
<trans-unit id="sb635ad3c2e357d3c">
<source>This is the password to be used with basic auth</source>
<target>Basic auth에 사용할 비밀번호입니다.</target>
</trans-unit>
<trans-unit id="sa92398dba8b12d85">
<source>Mapping</source>
<target>매핑</target>
</trans-unit>
<trans-unit id="s38162f615710c7b4">
<source>Modify the payload sent to the custom provider.</source>
<target>사용자 지정 공급자로 전송되는 페이로드를 수정합니다.</target>
</trans-unit>
<trans-unit id="s5e830ae7688d1219">
<source>Stage used to configure an SMS-based TOTP authenticator.</source>
<target>SMS 기반 TOTP 인증기를 구성하는 데 사용되는 스테이지입니다.</target>
</trans-unit>
<trans-unit id="s0d5d05bf3d122ced">
<source>Twilio</source>
<target>Twilio</target>
</trans-unit>
<trans-unit id="sc3c74f5273df459a">
<source>Generic</source>
<target>일반</target>
</trans-unit>
<trans-unit id="sbbb2180b6aed196e">
<source>From number</source>
<target>발신 번호</target>
</trans-unit>
<trans-unit id="sc647dcb91f6958dd">
<source>Number the SMS will be sent from.</source>
<target>SMS를 발송할 번호입니다.</target>
</trans-unit>
<trans-unit id="s0ae0072614320ae2">
<source>Hash phone number</source>
<target>해시한 전화 번호</target>
</trans-unit>
<trans-unit id="s9ca3310e1999fd5b">
<source>If enabled, only a hash of the phone number will be saved. This can be done for data-protection reasons. Devices created from a stage with this enabled cannot be used with the authenticator validation stage.</source>
<target>활성화하면 휴대폰 번호의 해시만 저장됩니다. 이는 데이터 보호를 위해 설정할 수 있습니다. 이 옵션을 활성화한 단계에서 만든 디바이스는 인증기 유효성 검사 스테이지에서 사용할 수 없습니다.</target>
</trans-unit>
<trans-unit id="s128e7f5f34bfa155">
<source>Stage used to configure a static authenticator (i.e. static tokens). This stage should be used for configuration flows.</source>
<target>정적 인증자(즉, 정적 토큰)를 구성하는 데 사용되는 스테이지입니다. 이 단계는 구성 플로우에 사용해야 합니다.</target>
</trans-unit>
<trans-unit id="sabf67834e35dede5">
<source>Token count</source>
<target>토큰 수</target>
</trans-unit>
<trans-unit id="sc5a4711395ffb043">
<source>Stage used to configure a TOTP authenticator (i.e. Authy/Google Authenticator).</source>
<target>TOTP 인증자를 구성하는 데 사용되는 단계(예: Authy/Google 인증자)입니다.</target>
</trans-unit>
<trans-unit id="s9d8ad4b85287131f">
<source>Digits</source>
<target>PIN(Digits)</target>
</trans-unit>
<trans-unit id="sc04e92d753742189">
<source>6 digits, widely compatible</source>
<target>6자리 숫자, 폭넓은 호환성</target>
</trans-unit>
<trans-unit id="sdc70195469e83e3f">
<source>8 digits, not compatible with apps like Google Authenticator</source>
<target>8자리 숫자, Google 인증기와 같은 앱과 호환되지 않음</target>
</trans-unit>
<trans-unit id="s0e15f678445dfc45">
<source>Stage used to validate any authenticator. This stage should be used during authentication or authorization flows.</source>
<target>인증기의 유효성을 검사하는 데 사용되는 스테이지입니다. 이 스테이지는 인증 또는 인가 플로우 중에 사용해야 합니다.</target>
</trans-unit>
<trans-unit id="s73c13e5a6f5e38a3">
<source>Device classes</source>
<target>디바이스 클래스</target>
</trans-unit>
<trans-unit id="s97d1b0070f50c07f">
<source>Static Tokens</source>
<target>정적 토큰</target>
</trans-unit>
<trans-unit id="sb8168ae309c66abc">
<source>TOTP Authenticators</source>
<target>TOTP 인증기</target>
</trans-unit>
<trans-unit id="sde47e4d8b9b21b59">
<source>WebAuthn Authenticators</source>
<target>WebAuthn 인증기</target>
</trans-unit>
<trans-unit id="s8da88a8a5750bce1">
<source>Duo Authenticators</source>
<target>Duo 인증기</target>
</trans-unit>
<trans-unit id="s4d182bae8a578010">
<source>SMS-based Authenticators</source>
<target>SMS-기반 인증기</target>
</trans-unit>
<trans-unit id="sd8d9451f86502d1a">
<source>Device classes which can be used to authenticate.</source>
<target>인증에 사용할 수 있는 디바이스 클래스입니다.</target>
</trans-unit>
<trans-unit id="se2e9f5a32c93e5f7">
<source>Last validation threshold</source>
<target>최종 유효성 검사 임계치</target>
</trans-unit>
<trans-unit id="s951281efc92b03fc">
<source>If any of the devices user of the types selected above have been used within this duration, this stage will be skipped.</source>
<target>위에서 선택한 유형의 사용자가 이 기간 내에 사용한 적이 있는 디바이스가 있으면 이 단계는 건너뛰게 됩니다.</target>
</trans-unit>
<trans-unit id="s681074b6c1f19c08">
<source>Not configured action</source>
<target>구성되지 않은 액션</target>
</trans-unit>
<trans-unit id="sa2c29dc5ed47b26d">
<source>Force the user to configure an authenticator</source>
<target>사용자가 인증기를 구성하도록 강제</target>
</trans-unit>
<trans-unit id="sa30c58514a3dc0fb">
<source>Deny the user access</source>
<target>사용자 액세스 거부</target>
</trans-unit>
<trans-unit id="s1e0de9c4f66dc371">
<source>WebAuthn User verification</source>
<target>WebAuthn 사용자 확인</target>
</trans-unit>
<trans-unit id="sdb7b2173869822bc">
<source>User verification must occur.</source>
<target>사용자 확인이 이루어져야 합니다.</target>
</trans-unit>
<trans-unit id="s7683363cdf78cf31">
<source>User verification is preferred if available, but not required.</source>
<target>가능한 경우 사용자 확인이 선호되지만 필수는 아닙니다.</target>
</trans-unit>
<trans-unit id="scb43f5faeb6a7ca9">
<source>User verification should not occur.</source>
<target>사용자 확인이 이루어지지 않아야 합니다.</target>
</trans-unit>
<trans-unit id="scae166352a31032c">
<source>Configuration stages</source>
<target>스테이지 구성</target>
</trans-unit>
<trans-unit id="s6941a67f0038ba4c">
<source>Stages used to configure Authenticator when user doesn't have any compatible devices. After this configuration Stage passes, the user is not prompted again.</source>
<target>사용자에게 호환되는 디바이스가 없는 경우 인증기를 구성하는 데 사용되는 단계입니다. 이 구성 스테이지를 통과한 후에는 사용자에게 다시 메시지가 표시되지 않습니다.</target>
</trans-unit>
<trans-unit id="s7e5af9c6ba6f5cc6">
<source>When multiple stages are selected, the user can choose which one they want to enroll.</source>
<target>여러 스테이지를 선택한 경우 사용자는 등록할 스테이지를 선택할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s34b23ebbac9f6ab9">
<source>User verification</source>
<target>사용자 확인</target>
</trans-unit>
<trans-unit id="s9ea472b555374771">
<source>Resident key requirement</source>
<target>Resident Key 요구 사항</target>
</trans-unit>
<trans-unit id="s5fbaeb14f42815e5">
<source>Authenticator Attachment</source>
<target>인증기 첨부</target>
</trans-unit>
<trans-unit id="s502d2473587032e1">
<source>No preference is sent</source>
<target>기본 설정이 전송되지 않음</target>
</trans-unit>
<trans-unit id="s60cc554fde2676cb">
<source>A non-removable authenticator, like TouchID or Windows Hello</source>
<target>TouchID 또는 Windows Hello와 같은 제거할 수 없는 인증기</target>
<source>This stage checks the user's current session against the Google reCaptcha (or compatible) service.</source>
<target>이 스테이지에서는 사용자의 현재 세션을 Google 리캡차(또는 호환) 서비스와 비교하여 확인합니다.</target>
</trans-unit>
<trans-unit id="sfd1af96798dd8a5f">
<source>Public Key</source>
<target>공개 키</target>
</trans-unit>
<trans-unit id="sf339673f0f76a8bd">
<source>Public key, acquired from https://www.google.com/recaptcha/intro/v3.html.</source>
<target>공개 키는, https://www.google.com/recaptcha/intro/v3.html 에서 얻을 수 있습니다.</target>
</trans-unit>
<trans-unit id="s83d0f62ad1731a03">
<source>Private Key</source>
<target>개인 키</target>
</trans-unit>
<trans-unit id="s892d2731a6f22e59">
<source>Private key, acquired from https://www.google.com/recaptcha/intro/v3.html.</source>
<target>개인 키는, https://www.google.com/recaptcha/intro/v3.html 에서 얻을 수 있습니다.</target>
</trans-unit>
<trans-unit id="scb6620fcd5bff04c">
<source>Advanced settings</source>
<target>고급 설정</target>
</trans-unit>
<trans-unit id="s39e436de1dc4df4f">
<source>JS URL</source>
<target>JS URL</target>
</trans-unit>
<trans-unit id="s170b705c55ecb2ae">
<source>URL to fetch JavaScript from, defaults to recaptcha. Can be replaced with any compatible alternative.</source>
<target>JavaScript를 가져올 URL입니다. 기본값은 recaptcha입니다. 호환되는 대체 사이트로 교체할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s275021658614ce9e">
<source>API URL</source>
<target>API URL</target>
</trans-unit>
<trans-unit id="sc8a79fddea3ab4a9">
<source>URL used to validate captcha response, defaults to recaptcha. Can be replaced with any compatible alternative.</source>
<target>보안 문자 응답의 유효성을 검사하는 데 사용되는 URL로, 기본값은 리캡차입니다. 호환 가능한 다른 것으로 대체할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s1cd617e7bbe278d0">
<source>Prompt for the user's consent. The consent can either be permanent or expire in a defined amount of time.</source>
<target>사용자의 동의를 요청하는 프롬포트를 표시합니다. 동의는 영구적이거나 정해진 시간 후에 만료할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s26513c9dd154f041">
<source>Always require consent</source>
<target>항상 동의 요청</target>
</trans-unit>
<trans-unit id="s8ce8bdc9cc9c8604">
<source>Consent given last indefinitely</source>
<target>비한정으로 동의 지속</target>
</trans-unit>
<trans-unit id="sb986f15fa9b17805">
<source>Consent expires.</source>
<target>동의가 만료됩니다.</target>
</trans-unit>
<trans-unit id="s6f328f2d8382d998">
<source>Consent expires in</source>
<target>동의가 만료되는 시점</target>
</trans-unit>
<trans-unit id="se0c660020d9cf5b7">
<source>Offset after which consent expires.</source>
<target>동의가 만료되는 오프셋입니다.</target>
</trans-unit>
<trans-unit id="s22b10ed263b96194">
<source>Dummy stage used for testing. Shows a simple continue button and always passes.</source>
<target>테스트에 사용되는 더미 스테이지입니다. 간단한 계속 버튼을 표시하고 항상 통과합니다.</target>
</trans-unit>
<trans-unit id="sdb861d9906f18ac2">
<source>Throw error?</source>
<target>오류 발생?</target>
</trans-unit>
<trans-unit id="s31ebc5431d677f5d">
<source>SMTP Host</source>
<target>SMTP 호스트</target>
</trans-unit>
<trans-unit id="s289fce7e694b98ac">
<source>SMTP Port</source>
<target>SMTP 포트</target>
</trans-unit>
<trans-unit id="se4a9da0295597e73">
<source>SMTP Username</source>
<target>SMTP 사용자명</target>
</trans-unit>
<trans-unit id="s593db2c00d6516a2">
<source>SMTP Password</source>
<target>SMTP 비밀번호</target>
</trans-unit>
<trans-unit id="s0d4268408182491d">
<source>Use TLS</source>
<target>TLS 사용</target>
</trans-unit>
<trans-unit id="s480c6c40a248f7d2">
<source>Use SSL</source>
<target>SSL 사용</target>
</trans-unit>
<trans-unit id="sc1feadd25659c94d">
<source>From address</source>
<target>발신자 주소</target>
</trans-unit>
<trans-unit id="sa248e1021d2c27b5">
<source>Verify the user's email address by sending them a one-time-link. Can also be used for recovery to verify the user's authenticity.</source>
<target>일회성 링크를 전송하여 사용자의 이메일 주소를 확인합니다. 사용자의 진위 여부를 확인하기 위한 복구용으로도 사용할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s87b7e3bc944c728c">
<source>Activate pending user on success</source>
<target>성공 시 보류 중인 사용자 활성화</target>
</trans-unit>
<trans-unit id="s9e9c8d99f4c26baf">
<source>When a user returns from the email successfully, their account will be activated.</source>
<target>사용자가 이메일에서 성공적으로 돌아오면 계정이 활성화됩니다.</target>
</trans-unit>
<trans-unit id="s618d4e53f455c834">
<source>Use global settings</source>
<target>전역 설정 사용</target>
</trans-unit>
<trans-unit id="sae1e1a59d22609c4">
<source>When enabled, global Email connection settings will be used and connection settings below will be ignored.</source>
<target>활성화하면, 전역 이메일 연결 설정이 사용되며 아래의 연결 설정은 무시됩니다.</target>
</trans-unit>
<trans-unit id="sb1fe947f9ad27b9d">
<source>Token expiry</source>
<target>토큰 유효기간</target>
</trans-unit>
<trans-unit id="s1c6ba8d100453392">
<source>Time in minutes the token sent is valid.</source>
<target>전송한 토큰이 유효한 시간입니다.</target>
</trans-unit>
<trans-unit id="se47baf2fd16b9d2b">
<source>Template</source>
<target>템플릿</target>
</trans-unit>
<trans-unit id="s4af8a3ce5a600855">
<source>Let the user identify themselves with their username or Email address.</source>
<target>사용자가 사용자 아이디 또는 이메일 주소로 신원을 확인할 수 있도록 합니다.</target>
</trans-unit>
<trans-unit id="s592ab7d2bc1b8973">
<source>User fields</source>
<target>사용자 필드</target>
</trans-unit>
<trans-unit id="s61e48919db20538a">
<source>UPN</source>
<target>UPN</target>
</trans-unit>
<trans-unit id="s4cdae7635e757555">
<source>Fields a user can identify themselves with. If no fields are selected, the user will only be able to use sources.</source>
<target>사용자가 자신을 식별할 수 있는 필드입니다. 필드를 선택하지 않으면 사용자는 소스만 사용할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s3380d7cbcebe50f6">
<source>Password stage</source>
<target>비밀번호 스테이지</target>
</trans-unit>
<trans-unit id="s08c91cb1a2cd3d97">
<source>When selected, a password field is shown on the same page instead of a separate page. This prevents username enumeration attacks.</source>
<target>이 옵션을 선택하면 비밀번호 필드가 별도의 페이지가 아닌 같은 페이지에 표시됩니다. 이렇게 하면 사용자명 무차별 입력 공격을 방지할 수 있습니다.</target>
</trans-unit>
<trans-unit id="sd97d8d0906e6cc47">
<source>Case insensitive matching</source>
<target>대소문자를 구분하지 않는 매칭</target>
</trans-unit>
<trans-unit id="s8aaad223e954f9ca">
<source>When enabled, user fields are matched regardless of their casing.</source>
<target>활성화하면 사용자 필드를 대소문자에 관계없이 매치합니다.</target>
</trans-unit>
<trans-unit id="sbab723b98dcfe23f">
<source>Show matched user</source>
<target>일치하는 사용자 표시</target>
</trans-unit>
<trans-unit id="se50a08ab71bb96ed">
<source>When a valid username/email has been entered, and this option is enabled, the user's username and avatar will be shown. Otherwise, the text that the user entered will be shown.</source>
<target>유효한 사용자 아이디/이메일을 입력하고 이 옵션을 활성화하면 사용자의 사용자 아이디와 아바타가 표시됩니다. 그렇지 않으면 사용자가 입력한 텍스트가 표시됩니다.</target>
</trans-unit>
<trans-unit id="s0295ce5d6f635d75">
<source>Source settings</source>
<target>소스 설정</target>
</trans-unit>
<trans-unit id="s91e3a47599412f51">
<source>Sources</source>
<target>소스</target>
</trans-unit>
<trans-unit id="s17a679298216aca9">
<source>Select sources should be shown for users to authenticate with. This only affects web-based sources, not LDAP.</source>
<target>사용자가 인증할 소스를 선택할 수 있도록 표시해야 합니다. 이는 웹 기반 소스에만 영향을 미치며 LDAP에는 영향을 미치지 않습니다.</target>
</trans-unit>
<trans-unit id="sa41aee3ae04c9216">
<source>Show sources' labels</source>
<target>소스의 라벨 표시</target>
</trans-unit>
<trans-unit id="s54cd35e6224ba65d">
<source>By default, only icons are shown for sources. Enable this to show their full names.</source>
<target>기본적으로 소스에는, 아이콘만 표시됩니다. 전체 이름을 표시하려면 이 옵션을 활성화합니다.</target>
</trans-unit>
<trans-unit id="s9ee20003cb116abf">
<source>Passwordless flow</source>
<target>비밀번호 없는 플로우</target>
</trans-unit>
<trans-unit id="s0c8c4d2bb0a9162a">
<source>Optional passwordless flow, which is linked at the bottom of the page. When configured, users can use this flow to authenticate with a WebAuthn authenticator, without entering any details.</source>
<target>페이지 하단에 링크된 선택적 비밀번호 없는 플로우입니다. 이 플로우를 구성하면 사용자는 세부 정보를 입력하지 않고도 이 플로우를 사용하여 WebAuthn 인증기로 인증할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s01a3a7f48ee4edaf">
<source>Optional enrollment flow, which is linked at the bottom of the page.</source>
<target>페이지 하단에 링크된, 선택적 등록 플로우를 참조하세요.</target>
</trans-unit>
<trans-unit id="s82188c9542510212">
<source>Optional recovery flow, which is linked at the bottom of the page.</source>
<target>페이지 하단에 링크된, 선택적 복구 플로우를 참조하세요.</target>
</trans-unit>
<trans-unit id="s3e59b8b2debf0209">
<source>This stage can be included in enrollment flows to accept invitations.</source>
<target>이 스테이지는 등록 플로우에 포함시켜 초대를 수락할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s79ad406777feab1f">
<source>Continue flow without invitation</source>
<target>초대 없이 플로우 계속</target>
</trans-unit>
<trans-unit id="s61ccefd661ac2296">
<source>If this flag is set, this Stage will jump to the next Stage when no Invitation is given. By default this Stage will cancel the Flow when no invitation is given.</source>
<target>이 플래그를 설정하면 초대를 받지 못했을 때 이 스테이지가 다음 스테이지로 이동합니다. 기본적으로 이 스테이지는 초대를 받지 못하면 플로우를 취소합니다.</target>
</trans-unit>
<trans-unit id="sdc30bddeda2f0225">
<source>Validate the user's password against the selected backend(s).</source>
<target>선택한 백엔드에 대해 사용자의 비밀번호를 검증합니다.</target>
</trans-unit>
<trans-unit id="sb8d4f44a1d5b9a14">
<source>Backends</source>
<target>백엔드</target>
</trans-unit>
<trans-unit id="sba42248f3f27955c">
<source>User database + standard password</source>
<target>사용자 데이터베이스 + 표준 비밀번호</target>
</trans-unit>
<trans-unit id="s3330adb3f0922f7b">
<source>User database + app passwords</source>
<target>사용자 데이터베이스 + 앱 비밀번호</target>
</trans-unit>
<trans-unit id="sc10db51c9bb77d5c">
<source>User database + LDAP password</source>
<target>사용자 데이터베이스 + LDAP 비밀번호</target>
</trans-unit>
<trans-unit id="sd35ae4be63df1f9f">
<source>Selection of backends to test the password against.</source>
<target>비밀번호를 테스트할 백엔드를 선택합니다.</target>
</trans-unit>
<trans-unit id="s482ae78809a6822b">
<source>Flow used by an authenticated user to configure their password. If empty, user will not be able to configure change their password.</source>
<target>인증된 사용자가 비밀번호를 구성하는 데 사용하는 플로우입니다. 비어 있으면 사용자가 비밀번호 변경을 구성할 수 없습니다.</target>
</trans-unit>
<trans-unit id="s77994108c886b965">
<source>Failed attempts before cancel</source>
<target>취소 전 실패 시도 횟수</target>
</trans-unit>
<trans-unit id="sa9020b93c3bd7235">
<source>How many attempts a user has before the flow is canceled. To lock the user out, use a reputation policy and a user_write stage.</source>
<target>플로우가 취소되기 전에 사용자가 시도할 수 있는 횟수입니다. 사용자를 잠그려면 평판 정책과 user_write 단계를 사용하세요.</target>
</trans-unit>
<trans-unit id="s5170f9ef331949c0">
<source>Show arbitrary input fields to the user, for example during enrollment. Data is saved in the flow context under the 'prompt_data' variable.</source>
<target>예를 들어, 등록 시 사용자에게 임의의 입력 필드를 표시합니다. 데이터는 플로우 컨텍스트의 'prompt_data' 변수 아래에 저장됩니다.</target>
<source>Selected policies are executed when the stage is submitted to validate the data.</source>
<target>데이터 유효성 검사를 위해 스테이지가 제출될 때 선택한 정책이 실행됩니다.</target>
</trans-unit>
<trans-unit id="sbf4ef82e04772a4e">
<source>Delete the currently pending user. CAUTION, this stage does not ask for confirmation. Use a consent stage to ensure the user is aware of their actions.</source>
<target>현재 대기 중인 사용자를 삭제합니다. 주의: 이 단계에서는 확인을 요청하지 않습니다. 동의 단계를 사용하여 사용자가 자신의 행동에 대해 인지하도록 하세요.</target>
</trans-unit>
<trans-unit id="s8cc920e6a8430a0d">
<source>Log the currently pending user in.</source>
<target>현재 대기 중인 사용자를 로그인합니다.</target>
</trans-unit>
<trans-unit id="sb85ffe141d7c229d">
<source>Session duration</source>
<target>세션 지속시간</target>
</trans-unit>
<trans-unit id="sece294cd51a85745">
<source>Determines how long a session lasts. Default of 0 seconds means that the sessions lasts until the browser is closed.</source>
<target>세션이 지속되는 시간을 결정합니다. 기본값인 0초는 브라우저가 닫힐 때까지 세션이 지속된다는 의미입니다.</target>
</trans-unit>
<trans-unit id="sf7949fbbab2eb566">
<source>Different browsers handle session cookies differently, and might not remove them even when the browser is closed.</source>
<target>브라우저마다 세션 쿠키를 처리하는 방식이 다르기 때문에 브라우저를 닫아도 세션 쿠키가 제거되지 않을 수 있습니다.</target>
<source>If set to a duration above 0, the user will have the option to choose to "stay signed in", which will extend their session by the time specified here.</source>
<source>Stages are single steps of a Flow that a user is guided through. A stage can only be executed from within a flow.</source>
<target>스테이지는 사용자에게 안내되는 플로우의 단일 단계입니다. 스테이지는 플로우 내에서만 실행할 수 있습니다.</target>
</trans-unit>
<trans-unit id="sb69a4b0acd0895f2">
<source>Flows</source>
<target>플로우</target>
</trans-unit>
<trans-unit id="s0eaf755fa88c8d97">
<source>Stage(s)</source>
<target>스테이지</target>
</trans-unit>
<trans-unit id="s3914cb410fca44d4">
<source>Import</source>
<target>가져오기</target>
</trans-unit>
<trans-unit id="s8a67b33a0d70d322">
<source>Import Duo device</source>
<target>Duo 디바이스 가져오기</target>
</trans-unit>
<trans-unit id="s48cf8fd56b1237ed">
<source>Successfully updated flow.</source>
<target>플로우를 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="sc3e0c240b159fbce">
<source>Successfully created flow.</source>
<target>플로우를 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="s925936f647ae52cc">
<source>Shown as the Title in Flow pages.</source>
<target>플로우 페이지에서 제목으로 표시됩니다.</target>
</trans-unit>
<trans-unit id="s50719dda8f90abf4">
<source>Visible in the URL.</source>
<target>URL에 표시됩니다.</target>
</trans-unit>
<trans-unit id="s0f4c6540c30bd8b4">
<source>Designation</source>
<target>지정</target>
</trans-unit>
<trans-unit id="sb25d9afe10941425">
<source>Decides what this Flow is used for. For example, the Authentication flow is redirect to when an un-authenticated user visits authentik.</source>
<target>이 플로우가 사용되는 용도를 결정합니다. 예를 들어, 인증되지 않은 사용자가 authentik을 방문할 때 인증 플로우가 리디렉션됩니다.</target>
</trans-unit>
<trans-unit id="sb36e4c05244278c1">
<source>No requirement</source>
<target>필수 조건 없음</target>
</trans-unit>
<trans-unit id="s7b105164d209f670">
<source>Require authentication</source>
<target>인증 필요</target>
</trans-unit>
<trans-unit id="s239c2a351cde6d39">
<source>Require no authentication.</source>
<target>인증 필요 없음.</target>
</trans-unit>
<trans-unit id="s98beadfeeb3acb66">
<source>Require superuser.</source>
<target>슈퍼유저권한이 필요합니다.</target>
</trans-unit>
<trans-unit id="sfad9279cc42c6b61">
<source>Required authentication level for this flow.</source>
<target>플로우에 필요한 인증 레벨을 요구합니다.</target>
</trans-unit>
<trans-unit id="sb56674c9ea4f0588">
<source>Behavior settings</source>
<target>동작 설정</target>
</trans-unit>
<trans-unit id="sb6d7d58cb0a1544e">
<source>Compatibility mode</source>
<target>호환성 모드</target>
</trans-unit>
<trans-unit id="s14ace18ccf4fb86d">
<source>Increases compatibility with password managers and mobile devices.</source>
<target>비밀번호 관리자 및 모바일 디바이스와의 호환성을 높입니다.</target>
</trans-unit>
<trans-unit id="scfbc2f1396ee8550">
<source>Denied action</source>
<target>거부 조치</target>
</trans-unit>
<trans-unit id="sff38031cf061e3ae">
<source>Will follow the ?next parameter if set, otherwise show a message</source>
<target>?next 매개변수가 설정되어 있으면 이를 따르고, 그렇지 않으면 메시지를 표시</target>
</trans-unit>
<trans-unit id="s936bf4342b182ad4">
<source>Will either follow the ?next parameter or redirect to the default interface</source>
<target>?next 매개변수를 따르거나 기본 인터페이스로 리디렉션</target>
</trans-unit>
<trans-unit id="s22b0e8c5277dd5a9">
<source>Will notify the user the flow isn't applicable</source>
<target>사용자에게 해당 플로우가 적용되지 않음을 알림</target>
</trans-unit>
<trans-unit id="s2eeca5cfc99ef19b">
<source>Decides the response when a policy denies access to this flow for a user.</source>
<target>정책에서 사용자의 이 플로우에 대한 액세스를 거부할 때 응답을 결정합니다.</target>
</trans-unit>
<trans-unit id="sbaf20067de176c90">
<source>Appearance settings</source>
<target>외형 설정</target>
</trans-unit>
<trans-unit id="s2e4818861000b13f">
<source>Layout</source>
<target>레이아웃</target>
</trans-unit>
<trans-unit id="s1efbfc3937d565bd">
<source>Background</source>
<target>배경</target>
</trans-unit>
<trans-unit id="s374abf1a54d87b67">
<source>Background shown during execution.</source>
<target>실행 중 배경이 표시됩니다.</target>
</trans-unit>
<trans-unit id="s3ebf4c166058afce">
<source>Clear background</source>
<target>배경 지우기</target>
</trans-unit>
<trans-unit id="sb24755ea94bef31d">
<source>Delete currently set background image.</source>
<target>현재 설정된 배경 이미지를 삭제합니다.</target>
</trans-unit>
<trans-unit id="sb904f23f17b60c3a">
<source>Successfully imported flow.</source>
<target>플로우를 성공적으로 가져왔습니다.</target>
</trans-unit>
<trans-unit id="s344c4a2a48997e18">
<source>.yaml files, which can be found on goauthentik.io and can be exported by authentik.</source>
<target>.yaml 파일로 내보낼 수 있으며, 이 파일은 goauthentik.io에서 찾을 수 있고 authentik을 통해 내보낼 수 있습니다.</target>
</trans-unit>
<trans-unit id="sc816360d6f5a1eeb">
<source>Flows describe a chain of Stages to authenticate, enroll or recover a user. Stages are chosen based on policies applied to them.</source>
<target>플로우는 사용자를 인증, 등록 또는 복구하기 위한 일련의 단계를 설명합니다. 스테이지에 적용되는 정책에 따라 스테이지가 선택됩니다.</target>
</trans-unit>
<trans-unit id="s6f857299d5db1ecf">
<source>Flow(s)</source>
<target>플로우</target>
</trans-unit>
<trans-unit id="s9e830cbc0b42a514">
<source>Update Flow</source>
<target>플로우 업데이트</target>
</trans-unit>
<trans-unit id="s2f1bcfcc5cae94c3">
<source>Create Flow</source>
<target>플로우 생성</target>
</trans-unit>
<trans-unit id="s832282d415294df4">
<source>Import Flow</source>
<target>플로우 가져오기</target>
</trans-unit>
<trans-unit id="s098237f7ccb4dc4a">
<source>Successfully cleared flow cache</source>
<target>플로우 캐시를 성공적으로 지웠습니다.</target>
</trans-unit>
<trans-unit id="s59572c1be31a812e">
<source>Failed to delete flow cache</source>
<target>플로우 캐시를 삭제하지 못했습니다.</target>
</trans-unit>
<trans-unit id="sa2b727168b090d34">
<source>Clear Flow cache</source>
<target>플로우 캐시 지우기</target>
</trans-unit>
<trans-unit id="sf12d588a76ba7e51">
<source>Are you sure you want to clear the flow cache?
This will cause all flows to be re-evaluated on their next usage.</source>
<target>플로우 캐시를 지우시겠습니까?
이렇게 하면 다음 사용 시 모든 플로우가 재평가됩니다.</target>
</trans-unit>
<trans-unit id="sbe47a5bdeec19ab0">
<source>Stage binding(s)</source>
<target>스테이지 바인딩</target>
</trans-unit>
<trans-unit id="sfa88f413e287bb0f">
<source>Stage type</source>
<target>스테이지 유형</target>
</trans-unit>
<trans-unit id="s04440099d97c0bef">
<source>Edit Stage</source>
<target>스테이지 편집</target>
</trans-unit>
<trans-unit id="s980270d0fab7ecb3">
<source>Update Stage binding</source>
<target>스테이지 바인딩 업데이트</target>
</trans-unit>
<trans-unit id="sfe938c1585e0bf68">
<source>These bindings control if this stage will be applied to the flow.</source>
<target>이러한 바인딩은 이 단계가 플로우에 적용될지 여부를 제어합니다.</target>
</trans-unit>
<trans-unit id="sfac6f995c7670559">
<source>No Stages bound</source>
<target>스테이지 바인딩 없음</target>
</trans-unit>
<trans-unit id="s955c1fec1c6fb970">
<source>No stages are currently bound to this flow.</source>
<target>현재 이 흐름에 바인딩된 스테이지가 없습니다.</target>
</trans-unit>
<trans-unit id="s9a393a04eaf1eb0e">
<source>Create Stage binding</source>
<target>스테이지 바인딩 생성</target>
</trans-unit>
<trans-unit id="s207e8b106806d7e4">
<source>Bind stage</source>
<target>스테이지 바인드</target>
</trans-unit>
<trans-unit id="scc2e420c54dc8089">
<source>Bind existing stage</source>
<target>기존 스테이지 바인드</target>
</trans-unit>
<trans-unit id="s30d1f50f476c3f48">
<source>Flow Overview</source>
<target>플로우 개요</target>
</trans-unit>
<trans-unit id="s77099d752f1ab773">
<source>Related actions</source>
<target>관련 액션</target>
</trans-unit>
<trans-unit id="sd07866d9f38b2c50">
<source>Execute flow</source>
<target>플로우 실행</target>
</trans-unit>
<trans-unit id="s9ff3121d30f88d52">
<source>Normal</source>
<target>Normal</target>
</trans-unit>
<trans-unit id="s6e4c997a101b6abf">
<source>with current user</source>
<target>현재 사용자로</target>
</trans-unit>
<trans-unit id="s8ecdbff1a7329b64">
<source>with inspector</source>
<target>감사관과 함께</target>
</trans-unit>
<trans-unit id="s3576aead3e68c5c9">
<source>Export flow</source>
<target>플로우 내보내기</target>
</trans-unit>
<trans-unit id="s293aa6a6446fb153">
<source>Export</source>
<target>내보내기</target>
</trans-unit>
<trans-unit id="se2c3cbf2ed1403f1">
<source>Stage Bindings</source>
<target>스테이지 바인딩</target>
</trans-unit>
<trans-unit id="s78c08391ffbfb8c0">
<source>These bindings control which users can access this flow.</source>
<target>이러한 바인딩은 이 플로우에 액세스할 수 있는 사용자를 제어합니다.</target>
<source>Local (notifications will be created within authentik)</source>
<target>로컬 (통지는 Authentik 내에 생성됩니다.)</target>
</trans-unit>
<trans-unit id="sede0abbf2b612812">
<source>Webhook (generic)</source>
<target>웹훅 (일반)</target>
</trans-unit>
<trans-unit id="s76f5dca6404a1210">
<source>Webhook (Slack/Discord)</source>
<target>웹훅 (Slack/Discord)</target>
</trans-unit>
<trans-unit id="s6873bdbfa24615fb">
<source>Webhook URL</source>
<target>웹훅 URL</target>
</trans-unit>
<trans-unit id="s25ec2846f6b88214">
<source>Webhook Mapping</source>
<target>웹훅 맵핑</target>
</trans-unit>
<trans-unit id="sca2879d96f58a39c">
<source>Send once</source>
<target>한 번만 전송</target>
</trans-unit>
<trans-unit id="s2430e000b7cfefd0">
<source>Only send notification once, for example when sending a webhook into a chat channel.</source>
<target>예를 들어 채팅 채널로 웹훅을 보낼 때 알림을 한 번만 보내세요.</target>
</trans-unit>
<trans-unit id="s819509c33a7534ac">
<source>Notification Transports</source>
<target>통지 전송</target>
</trans-unit>
<trans-unit id="s57072ffb92b6c9c8">
<source>Define how notifications are sent to users, like Email or Webhook.</source>
<target>이메일 또는 웹훅과 같이 사용자에게 알림을 보내는 방법을 정의합니다.</target>
</trans-unit>
<trans-unit id="s624256f8a4bb4c89">
<source>Notification transport(s)</source>
<target>통지 전송</target>
</trans-unit>
<trans-unit id="sac1332e6f421526e">
<source>Update Notification Transport</source>
<target>통지 전송 업데이트</target>
</trans-unit>
<trans-unit id="s6b5002c605b39d6d">
<source>Create Notification Transport</source>
<target>통지 전송 생성</target>
</trans-unit>
<trans-unit id="s0a39e4f61ccafacb">
<source>Successfully updated rule.</source>
<target>규칙을 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="s72e102414fec81a4">
<source>Successfully created rule.</source>
<target>규칙을 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="sa55ee64c5c51df0f">
<source>Select the group of users which the alerts are sent to. If no group is selected the rule is disabled.</source>
<target>알림을 전송할 사용자 그룹을 선택합니다. 그룹을 선택하지 않으면 규칙이 비활성화됩니다.</target>
</trans-unit>
<trans-unit id="sffa171e11d4ae513">
<source>Transports</source>
<target>전송</target>
</trans-unit>
<trans-unit id="s7b18721be331241e">
<source>Select which transports should be used to notify the user. If none are selected, the notification will only be shown in the authentik UI.</source>
<target>사용자에게 통지를 보내는 데 사용할 전송을 선택합니다. 아무것도 선택하지 않으면 통지는 authentik UI에만 표시됩니다.</target>
</trans-unit>
<trans-unit id="scd0cfe87af6f2ff2">
<source>Severity</source>
<target>심각도</target>
</trans-unit>
<trans-unit id="s98c3bdf4fd5cdf65">
<source>Notification Rules</source>
<target>통지 규칙</target>
</trans-unit>
<trans-unit id="s107bf77afb93c9b8">
<source>Send notifications whenever a specific Event is created and matched by policies.</source>
<target>특정 이력이 생성되고 정책과 일치할 때마다 통지를 보냅니다.</target>
</trans-unit>
<trans-unit id="sf3f9a0feaf083207">
<source>Sent to group</source>
<target>그룹에게 전송</target>
</trans-unit>
<trans-unit id="sc92ed9d5e01d3f24">
<source>Notification rule(s)</source>
<target>통지 규칙</target>
</trans-unit>
<trans-unit id="s5140d157642d7362">
<source>None (rule disabled)</source>
<target>없음 (규칙 비활성화)</target>
</trans-unit>
<trans-unit id="sd1146418b344f81f">
<source>Update Notification Rule</source>
<target>통지 규칙 업데이트</target>
</trans-unit>
<trans-unit id="sbbc1de43ab6c1f76">
<source>Create Notification Rule</source>
<target>통지 규칙 생성</target>
</trans-unit>
<trans-unit id="s5795b310ab271d20">
<source>These bindings control upon which events this rule triggers.
Bindings to groups/users are checked against the user of the event.</source>
<target>이러한 바인딩은 이 규칙이 격발되는 이력을 제어합니다.
그룹/사용자에 대한 바인딩은 이벤트의 사용자에 대해 확인됩니다.</target>
</trans-unit>
<trans-unit id="s90c3b62194fe8508">
<source>Outpost Deployment Info</source>
<target>Outpost 배포 정보</target>
</trans-unit>
<trans-unit id="s35f9df7668d5fa79">
<source>View deployment documentation</source>
<target>배포 보기</target>
</trans-unit>
<trans-unit id="sad09c62cb4ebae68">
<source>Click to copy token</source>
<target>토큰을 복사하려면 클릭</target>
</trans-unit>
<trans-unit id="s0e03fe2dc5b9164b">
<source>If your authentik Instance is using a self-signed certificate, set this value.</source>
<target>Authentik 인스턴스에서 자체 서명 인증서를 사용하는 경우, 이 값을 설정합니다.</target>
</trans-unit>
<trans-unit id="sc21032b0d37882a0">
<source>If your authentik_host setting does not match the URL you want to login with, add this setting.</source>
<target>authentik_host 설정이 로그인하려는 URL과 일치하지 않는 경우, 이 설정을 추가하세요.</target>
</trans-unit>
<trans-unit id="s6f270e1668c036e9">
<source>Successfully updated outpost.</source>
<target>Outpost를 성공적으로 업데이트했습니다.</target>
</trans-unit>
<trans-unit id="s79aed8154d7c472c">
<source>Successfully created outpost.</source>
<target>Outpost를 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="s8afc8c5aafb392d3">
<source>Radius</source>
<target>Radius</target>
</trans-unit>
<trans-unit id="s03970aa76a09982d">
<source>Integration</source>
<target>통합</target>
</trans-unit>
<trans-unit id="s9c29565c5ae1cc92">
<source>Selecting an integration enables the management of the outpost by authentik.</source>
<target>통합을 선택하면 authentik을 통해 outpost를 관리할 수 있습니다.</target>
</trans-unit>
<trans-unit id="s554ce268e9727e79">
<source>You can only select providers that match the type of the outpost.</source>
<target>Outpost 유형과 일치하는 공급자만 선택할 수 있습니다.</target>
</trans-unit>
<trans-unit id="sf9b1c0661a02d9f9">
<source>Configuration</source>
<target>구성</target>
</trans-unit>
<trans-unit id="s3abecf1e778c9625">
<source>See more here:</source>
<target>자세한 내용은 여기를 참조하세요:</target>
</trans-unit>
<trans-unit id="s74cb3d66f6a668e1">
<source>Documentation</source>
<target>문서</target>
</trans-unit>
<trans-unit id="saa8939ac88a76f98">
<source>Last seen</source>
<target>마지막 확인</target>
</trans-unit>
<trans-unit id="s1ac2653a6492b435">
<source><x id="0" equiv-text="${this.outpostHealth.version}"/>, should be <x id="1" equiv-text="${this.outpostHealth.versionShould}"/></source>
<source>Successfully created integration.</source>
<target>통합을 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="se9b1fec72ffd8f48">
<source>Local</source>
<target>로컬</target>
</trans-unit>
<trans-unit id="sc1231049879b8d33">
<source>If enabled, use the local connection. Required Docker socket/Kubernetes Integration.</source>
<target>활성화된 경우, 로컬 연결을 사용합니다. 도커/쿠버네티스 통합에 필수적입니다.</target>
</trans-unit>
<trans-unit id="s13de04774ff0f210">
<source>Docker URL</source>
<target>도커 URL</target>
</trans-unit>
<trans-unit id="sa7fcf026bd25f231">
<source>Can be in the format of 'unix://' when connecting to a local docker daemon, using 'ssh://' to connect via SSH, or 'https://:2376' when connecting to a remote system.</source>
<target>로컬 도커 데몬에 연결할 때는 'unix://', SSH를 통해 연결할 때는 'ssh://', 원격 시스템에 연결할 때는 'https://:2376'의 형식을 사용할 수 있습니다.</target>
</trans-unit>
<trans-unit id="saf1d289e3137c2ea">
<source>CA which the endpoint's Certificate is verified against. Can be left empty for no validation.</source>
<target>엔드포인트의 인증서를 검증하는 CA입니다. 검증을 수행하지 않으려면 비워둘 수 있습니다.</target>
<target>오류: 지원되지 않는 소스 설정입니다: <x id="0" equiv-text="${source.component}"/></target>
</trans-unit>
<trans-unit id="sd1031bddc66dc495">
<source>Connect your user account to the services listed below, to allow you to login using the service instead of traditional credentials.</source>
<target>사용자 계정을 아래 나열된 서비스에 연결하여 기존 자격증명 대신 서비스를 사용하여 로그인할 수 있도록 합니다.</target>
</trans-unit>
<trans-unit id="s7968dbed9b106c29">
<source>No services available.</source>
<target>사용 가능한 서비스가 없습니다.</target>
</trans-unit>
<trans-unit id="s3a135682bd30bdbb">
<source>Create App password</source>
<target>앱 비밀번호 생성</target>
</trans-unit>
<trans-unit id="s588796ee929a2e4c">
<source>User details</source>
<target>사용자 세부 정보</target>
</trans-unit>
<trans-unit id="s332a5235948c1a1d">
<source>Consent</source>
<target>동의</target>
</trans-unit>
<trans-unit id="sff945d3f59b93c5e">
<source>MFA Devices</source>
<target>MFA 디바이스</target>
</trans-unit>
<trans-unit id="sc54aafeea9c9bab0">
<source>Connected services</source>
<target>연결된 서비스</target>
</trans-unit>
<trans-unit id="sc6b4ebd37b7a91c7">
<source>Tokens and App passwords</source>
<target>토큰 및 앱 비밀번호</target>
</trans-unit>
<trans-unit id="sba65ae54d6585c1a">
<source>Unread notifications</source>
<target>읽지 않은 통지</target>
</trans-unit>
<trans-unit id="s5599c62bb78c631f">
<source>Admin interface</source>
<target>관리자 인터페이스</target>
</trans-unit>
<trans-unit id="s1298e361e40ee1c5">
<source>Stop impersonation</source>
<target>가장(impersonation) 중지</target>
</trans-unit>
<trans-unit id="s6abff64e7ff7fde9">
<source>Avatar image</source>
<target>아바타 이미지</target>
</trans-unit>
<trans-unit id="sbf9c5c5a8e5efad4">
<source>Failed</source>
<target>실패</target>
</trans-unit>
<trans-unit id="se4cd073c125382af">
<source>Unsynced / N/A</source>
<target>비동기화 / N/A</target>
</trans-unit>
<trans-unit id="s21b3058faf874368">
<source>Outdated outposts</source>
<target>구식 outpost</target>
</trans-unit>
<trans-unit id="s51f92b6fa76656ca">
<source>Unhealthy outposts</source>
<target>불량한 outposts</target>
</trans-unit>
<trans-unit id="s0fbf6dc6a1966408">
<source>Next</source>
<target>다음</target>
</trans-unit>
<trans-unit id="s4409ada9c5c2a7f8">
<source>Inactive</source>
<target>비활성</target>
</trans-unit>
<trans-unit id="s7ec7036b249f4f22">
<source>Regular user</source>
<target>일반 사용자</target>
</trans-unit>
<trans-unit id="s27976e94b05c6970">
<source>Activate</source>
<target>활성화</target>
</trans-unit>
<trans-unit id="s1024166475850a65">
<source>Use Server URI for SNI verification</source>
<target>SNI 확인에 서버 URI 사용</target>
</trans-unit>
<trans-unit id="se65beb94fffc3c4b">
<source>Required for servers using TLS 1.3+</source>
<target>TLS 1.3 이상을 사용하는 서버에 필요</target>
</trans-unit>
<trans-unit id="s5506b35a1bceb141">
<source>Client certificate keypair to authenticate against the LDAP Server's Certificate.</source>
<target>클라이언트 인증서 키쌍으로 LDAP 서버의 인증서에 대해 인증합니다.</target>
</trans-unit>
<trans-unit id="s4647b2c92638d6fd">
<source>The certificate for the above configured Base DN. As a fallback, the provider uses a self-signed certificate.</source>
<target>위에 구성된 기본 DN에 대한 인증서입니다. 공급자는 대체 수단으로 자체 서명된 인증서를 사용합니다.</target>
</trans-unit>
<trans-unit id="scd247ffad6e04ac0">
<source>TLS Server name</source>
<target>TLS 서버 이름</target>
</trans-unit>
<trans-unit id="s2acef4f6ba39bf11">
<source>DNS name for which the above configured certificate should be used. The certificate cannot be detected based on the base DN, as the SSL/TLS negotiation happens before such data is exchanged.</source>
<target>위에 구성된 인증서를 사용해야 하는 DNS 이름입니다. SSL/TLS 협상이 발생하기 전에 이러한 데이터가 교환되기 때문에 기본 Distinguished Name(DN)을 기준으로 인증서를 감지할 수 없습니다.</target>
<source>Match events created by selected model. When left empty, all models are matched.</source>
<target>선택한 모델에 의해 생성된 이벤트와 일치시킵니다. 비워두면 모든 모델이 일치합니다.</target>
</trans-unit>
<trans-unit id="s254d527e3a53dbb7">
<source>Code-based MFA Support</source>
<target>코드 기반 다중 인증 (MFA) 지원</target>
</trans-unit>
<trans-unit id="s1889ba2eaeec2f1e">
<source>When enabled, code-based multi-factor authentication can be used by appending a semicolon and the TOTP code to the password. This should only be enabled if all users that will bind to this provider have a TOTP device configured, as otherwise a password may incorrectly be rejected if it contains a semicolon.</source>
<target>이 옵션을 활성화하면, 비밀번호에 세미콜론과 TOTP 코드를 추가하여 코드 기반 멀티팩터 인증을 사용할 수 있습니다. 비밀번호에 세미콜론이 포함되어 있으면 비밀번호가 거부될 수 있으므로, 이 공급자에 바인딩할 모든 사용자가 TOTP 디바이스를 구성한 경우에만 이 기능을 사용하도록 설정해야 합니다.</target>
</trans-unit>
<trans-unit id="s9f9492d30a96b9c6">
<source>User type</source>
<target>사용자 유형</target>
</trans-unit>
<trans-unit id="s0e427111d750cc02">
<source>Successfully updated license.</source>
<target>라이선스 업데이트에 성공했습니다.</target>
</trans-unit>
<trans-unit id="s06ae64e621f302eb">
<source>Successfully created license.</source>
<target>라이선스를 성공적으로 생성했습니다.</target>
</trans-unit>
<trans-unit id="s2905c425adae99bd">
<source>Install ID</source>
<target>설치 ID</target>
</trans-unit>
<trans-unit id="sb18ec434a8a3aafb">
<source>License key</source>
<target>라이선스 키</target>
</trans-unit>
<trans-unit id="s2e109263b73c12d5">
<source>Licenses</source>
<target>라이선스</target>
</trans-unit>
<trans-unit id="sd49099e9522635f4">
<source>License(s)</source>
<target>라이선스</target>
</trans-unit>
<trans-unit id="s3be1d90ffa46b7f1">
<source>Enterprise is in preview.</source>
<target>Enterprise는 현재 미리보기 입니다.</target>
</trans-unit>
<trans-unit id="sd22bd01bdf28c548">
<source>Cumulative license expiry</source>
<target>누적 라이선스 만료 기간</target>
</trans-unit>
<trans-unit id="sdeb6cee42435dd07">
<source>Update License</source>
<target>라이선스 업데이트</target>
</trans-unit>
<trans-unit id="s7df5b92a3f93544f">
<source>Warning: The current user count has exceeded the configured licenses.</source>
<target>경고: 현재 사용자 수가 구성된 라이선스를 초과했습니다.</target>
</trans-unit>
<trans-unit id="s0141f42936495787">
<source>Click here for more info.</source>
<target>자세한 내용을 보려면 여기를 클릭하세요.</target>
</trans-unit>
<trans-unit id="s7be2df39f727faa2">
<source>Enterprise</source>
<target>Enterprise</target>
</trans-unit>
<trans-unit id="s9ce7cc01fb9b5b53">
<source>Manage enterprise licenses</source>
<target>Enterprise 라이선스 관리</target>
</trans-unit>
<trans-unit id="sf9ebf11ac2645820">
<source>No licenses found.</source>
<target>라이선스를 찾을 수 없습니다.</target>
</trans-unit>
<trans-unit id="sa1db89262360550b">
<source>Send us feedback!</source>
<target>feedback 부탁드립니다!</target>
</trans-unit>
<trans-unit id="s4015746f55a8d89f">
<source>Get a license</source>
<target>라이선스 얻기</target>
</trans-unit>
<trans-unit id="sb2cbd06f8e25b47e">
<source>Go to Customer Portal</source>
<target>고객 포털로 가기</target>
</trans-unit>
<trans-unit id="sf58825457d61c429">
<source>Forecast internal users</source>
<target>내부 사용자 예측</target>
</trans-unit>
<trans-unit id="sde9a3f41977ec1f8">
<source>Estimated user count one year from now based on <x id="0" equiv-text="${this.forecast?.internalUsers}"/> current internal users and <x id="1" equiv-text="${this.forecast?.forecastedInternalUsers}"/> forecasted internal users.</source>
<target><x id="0" equiv-text="${this.forecast?.internalUsers}"/> 명의 내부 사용자를 기준으로 예상하는 일 년후 예상 사용자수는 <x id="1" equiv-text="${this.forecast?.forecastedInternalUsers}"/> 입니다.</target>
</trans-unit>
<trans-unit id="s4557b6b9da258643">
<source>Forecast external users</source>
<target>외부 사용자 예측</target>
</trans-unit>
<trans-unit id="sf52479d6daa0a4a8">
<source>Estimated user count one year from now based on <x id="0" equiv-text="${this.forecast?.externalUsers}"/> current external users and <x id="1" equiv-text="${this.forecast?.forecastedExternalUsers}"/> forecasted external users.</source>
<target><x id="0" equiv-text="${this.forecast?.externalUsers}"/> 명의 외부 사용자를 기준으로 예상하는 일 년후 예상 사용자수는 <x id="1" equiv-text="${this.forecast?.forecastedExternalUsers}"/> 입니다.</target>
</trans-unit>
<trans-unit id="s6196153c4b0c1ea0">
<source>Install</source>
<target>설치</target>
</trans-unit>
<trans-unit id="s0285b4bd69130fa3">
<source>Install License</source>
<target>라이선스 설치</target>
</trans-unit>
<trans-unit id="scef2eb6a2bfe3110">
<source>Internal users might be users such as company employees, which will get access to the full Enterprise feature set.</source>
<target>내부 사용자는 회사 직원과 같은 사용자로, 전체 엔터프라이즈 기능 세트에 액세스할 수 있습니다.</target>
</trans-unit>
<trans-unit id="sf66389b04fcc219c">
<source>External users might be external consultants or B2C customers. These users don't get access to enterprise features.</source>
<target>외부 사용자는 외부 컨설턴트나 B2C 고객일 수 있습니다. 이러한 사용자는 엔터프라이즈 기능에 액세스할 수 없습니다.</target>
</trans-unit>
<trans-unit id="s77e8668a27dbc402">
<source>Service accounts should be used for machine-to-machine authentication or other automations.</source>
<target>서비스 계정은 M2M(기계 간 인증) 또는 기타 자동화에 사용되어야 합니다.</target>
</trans-unit>
<trans-unit id="s28cbd874ba450b4e">
<source>Less details</source>
<target>적게 보기</target>
</trans-unit>
<trans-unit id="s8fa26f65aed77c96">
<source>More details</source>
<target>자세히 보기</target>
</trans-unit>
<trans-unit id="s08df8d0a773a3ea0">
<source>Remove item</source>
<target>항목 제거</target>
</trans-unit>
<trans-unit id="s364c4f177a2f8322">
<source>Open API drawer</source>
<target>API 서랍 열기</target>
</trans-unit>
<trans-unit id="s9ba989e69344ff29">
<source>Open Notification drawer</source>
<target>통지 서랍 열기</target>
</trans-unit>
<trans-unit id="s14bf17e2a1a2c381">
<source>Restart task</source>
<target>작업 다시 시작</target>
</trans-unit>
<trans-unit id="s19409e8712ddd369">
<source>Add provider</source>
<target>공급자 추가</target>
</trans-unit>
<trans-unit id="s1f7698c061c208c9">
<source>Open</source>
<target>열기</target>
</trans-unit>
<trans-unit id="scc3487e74c5a3e89">
<source>Copy token</source>
<target>토큰 복사</target>
</trans-unit>
<trans-unit id="s424f57afae0caac4">
<source>Add users</source>
<target>사용자 추가</target>
</trans-unit>
<trans-unit id="sd9f67fbf3f86efcf">
<source>Add group</source>
<target>그룹 추가</target>
</trans-unit>
<trans-unit id="s254a9a23dc1635df">
<source>Import devices</source>
<target>디바이스 가져오기</target>
</trans-unit>
<trans-unit id="sc4fdeccf14be5378">
<source>Execute</source>
<target>실행</target>
</trans-unit>
<trans-unit id="s3b3c333481944862">
<source>Show details</source>
<target>세부 정보 표시</target>
</trans-unit>
<trans-unit id="sb8f855b49234b81b">
<source>Apply</source>
<target>적용</target>
</trans-unit>
<trans-unit id="s9d8b8aa2b404c2c8">
<source>Settings</source>
<target>설정</target>
</trans-unit>
<trans-unit id="s7cfe12cd14df9950">
<source>Sign out</source>
<target>로그아웃</target>
</trans-unit>
<trans-unit id="s7caa8f7edb920909">
<source>The number of tokens generated whenever this stage is used. Every token generated per stage execution will be attached to a single static device.</source>
<target>이 스테이지가 사용될 때마다 생성되는 토큰의 수입니다. 스테이지가 실행될 때마다 생성되는 모든 토큰은 하나의 정적 디바이스에 연결됩니다.</target>
</trans-unit>
<trans-unit id="s4aacc4e0277c1042">
<source>Token length</source>
<target>토큰 길이</target>
</trans-unit>
<trans-unit id="s6931695c4f563bc4">
<source>The length of the individual generated tokens. Can be increased to improve security.</source>
<target>개별적으로 생성된 토큰의 길이입니다. 보안을 강화하기 위해 늘릴 수 있습니다.</target>
<source>Statically deny the flow. To use this stage effectively, disable *Evaluate when flow is planned* on the respective binding.</source>
<target>플로우를 정적으로 거부합니다. 이 스테이지를 효과적으로 사용하려면 각 바인딩에서 *플로우가 계획될 때 평가*를 비활성화하세요.</target>
</trans-unit>
<trans-unit id="s911a27022aba349f">
<source>Create and bind Policy</source>
<target>정책 생성 및 바인드</target>
</trans-unit>
<trans-unit id="sb1a4e9b288e2f005">
<source>Federation and Social login</source>
<target>연합 및 소셜 로그인</target>
</trans-unit>
<trans-unit id="s6f367f5604d5056d">
<source>Create and bind Stage</source>
<target>바인드 스테이지 생성</target>
</trans-unit>
<trans-unit id="s1a65ee08832fbfe2">
<source>Flows and Stages</source>
<target>플로우 및 스테이지</target>
</trans-unit>
<trans-unit id="s4ba4473f3d4ec896">
<source>New version available</source>
<target>새 버전 사용가능</target>
</trans-unit>
<trans-unit id="s6b1ed7507f26cb4a">
<source>Failure result</source>
<target>실패한 결과</target>
</trans-unit>
<trans-unit id="s2e422519ed38f7d8">
<source>Pass</source>
<target>통과</target>
</trans-unit>
<trans-unit id="s81a45c4fd11e8e1a">
<source>Don't pass</source>
<target>미통과</target>
</trans-unit>
<trans-unit id="s95b73e0f4e47eb9a">
<source>Result used when policy execution fails.</source>
<target>정책 실행이 실패할 때 사용되는 결과입니다.</target>
</trans-unit>
<trans-unit id="s6a3cf855140b9511">
<source>Required: User verification must occur.</source>
<target>필수: 사용자 확인이 이루어져야 합니다.</target>
</trans-unit>
<trans-unit id="sc498a3b05cfe2b08">
<source>Preferred: User verification is preferred if available, but not required.</source>
<target>선호: 가능한 경우 사용자 확인이 선호되지만 필수는 아닙니다.</target>
</trans-unit>
<trans-unit id="s9d2239d2b0402795">
<source>Discouraged: User verification should not occur.</source>
<target>비권장: 사용자 확인이 이루어지지 않아야 합니다.</target>
</trans-unit>
<trans-unit id="s428b7859907f6db2">
<source>Required: The authenticator MUST create a dedicated credential. If it cannot, the RP is prepared for an error to occur</source>
<target>필수: 인증기는 반드시 전용 자격 증명을 만들어야 합니다. 생성할 수 없는 경우, RP는 오류 발생에 대비해야 합니다</target>
</trans-unit>
<trans-unit id="s33e3766d4a02b042">
<source>Preferred: The authenticator can create and store a dedicated credential, but if it doesn't that's alright too</source>
<target>선호: 인증기는 특별한 자격 증명을 생성하고 저장할 수 있지만, 그렇지 않아도 괜찮습니다</target>
</trans-unit>
<trans-unit id="sfb852dd507c25c24">
<source>Discouraged: The authenticator should not create a dedicated credential</source>
<target>비권장: 인증기는 특별한 자격 증명을 생성하지 않아야 합니다</target>
</trans-unit>
<trans-unit id="s028d385389b5aac0">
<source>Lock the user out of this system</source>
<target>이 시스템에서 사용자 잠금</target>
</trans-unit>
<trans-unit id="sd2122c514f0778b5">
<source>Allow the user to log in and use this system</source>
<target>사용자가 로그인하여 이 시스템을 사용할 수 있도록 허용</target>
</trans-unit>
<trans-unit id="s43fe853bf219a9b8">
<source>Temporarily assume the identity of this user</source>
<target>일시적으로 이 사용자의 신원을 가정</target>
</trans-unit>
<trans-unit id="se28b5f3fcadaeeb1">
<source>Enter a new password for this user</source>
<target>이 사용자에 대한 새 비밀번호 입력</target>
</trans-unit>
<trans-unit id="s6f5bb31e2733ecd5">
<source>Create a link for this user to reset their password</source>
<target>이 사용자가 비밀번호를 재설정할 수 있는 링크 생성</target>
</trans-unit>
<trans-unit id="s67ac11d47f1ce794">
<source>WebAuthn requires this page to be accessed via HTTPS.</source>
<target>WebAuthn을 사용하려면 이 페이지에 HTTPS를 통해 액세스해야 합니다.</target>
</trans-unit>
<trans-unit id="se9e9e1d6799b86a5">
<source>WebAuthn not supported by browser.</source>
<target>브라우저에서 WebAuthn을 지원하지 않습니다.</target>
</trans-unit>
<trans-unit id="sff0ac1ace2d90709">
<source>Use this provider with nginx's auth_request or traefik's forwardAuth. Each application/domain needs its own provider. Additionally, on each domain, /outpost.goauthentik.io must be routed to the outpost (when using a managed outpost, this is done for you).</source>
<target>Nginx의 auth_request 또는 Traefik의 forwardAuth와 함께 이 공급자를 사용합니다. 각 응용 프로그램/도메인은 자체 공급자가 필요하며, 각 도메인에서는 /outpost.goauthentik.io가 아웃포스트로 라우팅되어야 합니다 (관리되는 아웃포스트를 사용하는 경우 이 작업은 자동으로 수행됩니다).</target>
</trans-unit>
<trans-unit id="scb58b8a60cad8762">
<source>Default relay state</source>
<target>기본 릴레이 상태</target>
</trans-unit>
<trans-unit id="s6827a456c9dfc6ee">
<source>When using IDP-initiated logins, the relay state will be set to this value.</source>
<target>IDP-initiated 로그인을 사용하는 경우, 릴레이 상태가 이 값으로 설정됩니다.</target>
</trans-unit>
<trans-unit id="s01794c0ee3629c1b">
<source>Flow Info</source>
<target>플로우 정보</target>
</trans-unit>
<trans-unit id="s24bce955914b1f0a">
<source>Stage used to configure a WebAuthn authenticator (i.e. Yubikey, FaceID/Windows Hello).</source>
<target>WebAuthn 인증기를 구성하는 데 사용되는 스테이지(예: Yubikey, FaceID/Windows Hello).</target>
</trans-unit>
<<<<<<< HEAD
<trans-unit id="s1cffe58249b04669">
<source>Internal application name used in URLs.</source>
<target>URL에 사용되는 내부 애플리케이션 이름입니다.</target>
</trans-unit>
<trans-unit id="sb3d4f79d9d8b71e5">
<source>Submit</source>
<target>제출</target>
</trans-unit>
<trans-unit id="se2b29e6cfe59414c">
<source>UI Settings</source>
<target>UI 설정</target>
</trans-unit>
<trans-unit id="s836148f721d8913b">
<source>Transparent Reverse Proxy</source>
<target>투명 리버스 프록시</target>
</trans-unit>
<trans-unit id="s945a6b94361ee45b">
<source>For transparent reverse proxies with required authentication</source>
<source>One hint, 'New Application Wizard', is currently hidden</source>
<target>힌트, '새 애플리케이션 마법사'는 현재, 숨겨져 있습니다.</target>
</trans-unit>
<trans-unit id="s61bd841e66966325">
<source>External applications that use authentik as an identity provider via protocols like OAuth2 and SAML. All applications are shown here, even ones you cannot access.</source>
<target>OAuth2 및 SAML과 같은 프로토콜을 통해 인증서를 ID 공급자로 사용하는 외부 애플리케이션. 액세스할 수 없는 애플리케이션을 포함한 모든 애플리케이션이 여기에 표시됩니다.</target>
</trans-unit>
<trans-unit id="s1cc306d8e28c4464">
<source>Deny message</source>
<target>거부 메시지</target>
</trans-unit>
<trans-unit id="s6985c401e1100122">
<source>Message shown when this stage is run.</source>
<source>Determines how long a session lasts before being disconnected and requiring re-authorization.</source>
</trans-unit>
<trans-unit id="s3271da6c18c25b18">
<source>Connection settings.</source>
</trans-unit>
<trans-unit id="s2f4ca2148183d692">
<source>Successfully updated endpoint.</source>
</trans-unit>
<trans-unit id="s5adee855dbe191d9">
<source>Successfully created endpoint.</source>
</trans-unit>
<trans-unit id="s61e136c0658e27d5">
<source>Protocol</source>
</trans-unit>
<trans-unit id="sa062b019ff0c8809">
<source>RDP</source>
</trans-unit>
<trans-unit id="s97f9bf19fa5b57d1">
<source>SSH</source>
</trans-unit>
<trans-unit id="s7c100119e9ffcc32">
<source>VNC</source>
</trans-unit>
<trans-unit id="s6b05f9d8801fc14f">
<source>Host</source>
</trans-unit>
<trans-unit id="sb474f652a2c2fc76">
<source>Hostname/IP to connect to.</source>
</trans-unit>
<trans-unit id="sc39f6abf0daedb0f">
<source>Maximum concurrent connections</source>
</trans-unit>
<trans-unit id="s62418cbcd2a25498">
<source>Maximum concurrent allowed connections to this endpoint. Can be set to -1 to disable the limit.</source>
</trans-unit>
<trans-unit id="s8276649077e8715c">
<source>Endpoint(s)</source>
</trans-unit>
<trans-unit id="sf1dabfe0fe8a75ad">
<source>Update Endpoint</source>
</trans-unit>
<trans-unit id="s008496c7716b9812">
<source>These bindings control which users will have access to this endpoint. Users must also have access to the application.</source>
</trans-unit>
<trans-unit id="s38e7cd1a24e70faa">
<source>Create Endpoint</source>
</trans-unit>
<trans-unit id="s4770c10e5b1c028c">
<source>RAC is in preview.</source>
</trans-unit>
<trans-unit id="s168565f5ac74a89f">
<source>Update RAC Provider</source>
</trans-unit>
<trans-unit id="s8465a2caa2d9ea5d">
<source>Endpoints</source>
</trans-unit>
<trans-unit id="s9857d883d8eb98fc">
<source>General settings</source>
</trans-unit>
<trans-unit id="sd2066881798a1b96">
<source>RDP settings</source>
</trans-unit>
<trans-unit id="sb864dc36a463a155">
<source>Ignore server certificate</source>
</trans-unit>
<trans-unit id="s20366a8d1eaaca54">
<source>Enable wallpaper</source>
</trans-unit>
<trans-unit id="s1e44c5350ef7598c">
<source>Enable font-smoothing</source>
</trans-unit>
<trans-unit id="s04ff5d6ae711e6d6">
<source>Enable full window dragging</source>
</trans-unit>
<trans-unit id="sab21e1f62676b56c">
<source>Successfully updated brand.</source>
</trans-unit>
<trans-unit id="sa43e43fd3a23e22d">
<source>Successfully created brand.</source>
</trans-unit>
<trans-unit id="s41b3f9b4c98aabd9">
<source>Use this brand for each domain that doesn't have a dedicated brand.</source>
</trans-unit>
<trans-unit id="s17260b71484b307f">
<source>Set custom attributes using YAML or JSON. Any attributes set here will be inherited by users, if the request is handled by this brand.</source>
</trans-unit>
<trans-unit id="s79fc990a2b58f27f">
<source>Brands</source>
</trans-unit>
<trans-unit id="s02774bc46a167346">
<source>Brand(s)</source>
</trans-unit>
<trans-unit id="s801bf3d03f4a3ff1">
<source>Update Brand</source>
</trans-unit>
<trans-unit id="s5c3efec5330e0000">
<source>Create Brand</source>
</trans-unit>
<trans-unit id="sa9d13ce9e83aac17">
<source>To let a user directly reset a their password, configure a recovery flow on the currently active brand.</source>
</trans-unit>
<trans-unit id="s94d61907ee22a8c1">
<source>Korean</source>
</trans-unit>
<trans-unit id="s95d56e58f816d211">
<source>Dutch</source>
</trans-unit>
<trans-unit id="s6709b81e1ed4e39f">
<source>The current brand must have a recovery flow configured to use a recovery link</source>
</trans-unit>
<trans-unit id="s663ccbfdf27e8dd0">
<source>Network binding</source>
</trans-unit>
<trans-unit id="sb108a06693c67753">
<source>No binding</source>
</trans-unit>
<trans-unit id="s5aab90c74f1233b8">
<source>Bind ASN</source>
</trans-unit>
<trans-unit id="s488303b048afe83b">
<source>Bind ASN and Network</source>
</trans-unit>
<trans-unit id="s3268dcfe0c8234dc">
<source>Bind ASN, Network and IP</source>
</trans-unit>
<trans-unit id="s226381aca231644f">
<source>Configure if sessions created by this stage should be bound to the Networks they were created in.</source>
</trans-unit>
<trans-unit id="s2555a1f20f3fd93e">
<source>GeoIP binding</source>
</trans-unit>
<trans-unit id="s3d63c78f93c9a92e">
<source>Bind Continent</source>
</trans-unit>
<trans-unit id="s395d5863b3a259b5">
<source>Bind Continent and Country</source>
</trans-unit>
<trans-unit id="s625ea0c32b4b136c">
<source>Bind Continent, Country and City</source>
</trans-unit>
<trans-unit id="s4bc7a1a88961be90">
<source>Configure if sessions created by this stage should be bound to their GeoIP-based location</source>
</trans-unit>
<trans-unit id="sa06cd519ff151b6d">
<source>RAC</source>
</trans-unit>
<trans-unit id="s634e2fd82c397576">
<source>Successfully updated settings.</source>
</trans-unit>
<trans-unit id="sb8e4edaea6f1d935">
<source>Avatars</source>
</trans-unit>
<trans-unit id="s945856050217c828">
<source>Configure how authentik should show avatars for users. The following values can be set:</source>
</trans-unit>
<trans-unit id="sf4ef4c8ce713f775">
<source>Disables per-user avatars and just shows a 1x1 pixel transparent picture</source>
</trans-unit>
<trans-unit id="s5446842a7e4a963b">
<source>Uses gravatar with the user's email address</source>
</trans-unit>
<trans-unit id="s35363b9e1cc2abd3">
<source>Generated avatars based on the user's name</source>
</trans-unit>
<trans-unit id="s48110ca292cad513">
<source>Any URL: If you want to use images hosted on another server, you can set any URL. Additionally, these placeholders can be used:</source>
</trans-unit>
<trans-unit id="sbe1dfda044bdc93b">
<source>The user's username</source>
</trans-unit>
<trans-unit id="s653f257c9c2d4dc5">
<source>The email address, md5 hashed</source>
</trans-unit>
<trans-unit id="s9c9183cd80916b4f">
<source>The user's UPN, if set (otherwise an empty string)</source>
</trans-unit>
<trans-unit id="h4963ed14d7e239a9">
<source>An attribute path like
<x id="0" equiv-text="<code>"/>attributes.something.avatar<x id="1" equiv-text="</code>"/>, which can be used in
combination with the file field to allow users to upload custom
avatars for themselves.</source>
</trans-unit>
<trans-unit id="s4c80c34a67a6f1c9">
<source>Multiple values can be set, comma-separated, and authentik will fallback to the next mode when no avatar could be found.</source>
</trans-unit>
<trans-unit id="h2fafcc3ebafea2f8">
<source>For example, setting this to <x id="0" equiv-text="<code>"/>gravatar,initials<x id="1" equiv-text="</code>"/> will
attempt to get an avatar from Gravatar, and if the user has not
configured on there, it will fallback to a generated avatar.</source>
</trans-unit>
<trans-unit id="s078ffec0257621c0">
<source>Enable the ability for users to change their name.</source>
</trans-unit>
<trans-unit id="s5fc6c14d106f40d3">
<source>Enable the ability for users to change their email.</source>
</trans-unit>
<trans-unit id="s6d816a95ca43a99d">
<source>Enable the ability for users to change their username.</source>
</trans-unit>
<trans-unit id="s57b52b60ed5e2bc7">
<source>Footer links</source>
</trans-unit>
<trans-unit id="s7349802b2f7f99c2">
<source>This option configures the footer links on the flow executor pages. It must be a valid JSON list and can be used as follows:</source>
</trans-unit>
<trans-unit id="s166b59f3cc5d8ec3">
<source>GDPR compliance</source>
</trans-unit>
<trans-unit id="sb8b23770f899e5bb">
<source>When enabled, all the events caused by a user will be deleted upon the user's deletion.</source>
